ISO 4308-1:2003 PDF

Scope: This part of ISO 4308 specifies two methods for the selection of wire rope to be used on lifting appliances as designated in ISO 4306-1, one based on the value of the rope selection factor C and the other based on the value of the coefficient of utilization Zp This part of ISO 4308 establishes the minimum requirements for acceptable strength and performance levels of wire ropes with respect to the design, application and maintenance of the lifting appliance. This part of ISO 4308-1 establishes the minimum requirements for the diameters of drums and sheaves that are to be associated with the selected wire rope. A non-exhaustive list of types of lifting appliance to which this part of ISO 4308 is applicable is given in Annex A. Annex B provides some examples of rope selection. Annex C gives factors, additional to those mentioned above, which may need consideration when selecting the wire rope. Annex D specifies the selection method for the diameter of the compensating sheave when used in relation to hoists.

ISO 4308-1:2003 Referenced Document

ISO 2408:1985 Steel wire ropes for general purposes; Characteristics
ISO 4301-1:1986 Cranes and lifting appliances; Classification; Part 1 : General
ISO 4306-1:1990 Cranes; vocabulary; part 1: general
ISO 4309 Cranes - Wire ropes - Care and maintenance, inspection and discard*， 2017-10-31 Update

2003 ISO 4308-1:2003 Cranes and lifting appliances - Selection of wire ropes - Part 1: General
1986 ISO 4308-1:1986 Cranes and lifting appliances; Selection of wire ropes; Part 1 : General