DIN EN 4033:2008
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads; German and English version EN 4033:2007
- Standard No.
- DIN EN 4033:2008
- Release Date
- 2008
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN 4033:2008-04
- Latest
- DIN EN 4033:2008-04
- Scope
- This standard specifies the characteristics of rigid single row ball bearings, in corrosion resisting steel, reduced internal radial clearance, diameter series 8 and 9 , designed to withstand only slow rotations and oscillations under load. They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms They are intended to be used in the temperature range: - 54 ℃ to 150 ℃. However, being lubricated with the following greases: very high pressure grease, ester type (code A), operational range - 73 ℃ to 121 ℃ or very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range - 54 ℃ to 177 ℃ (see EN 3280), their field of application when lubricated with code A grease is limited to 121 ℃.
DIN EN 4033:2008 Referenced Document
- EN 2030 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De = 150 mm*， 2024-04-18 Update
- EN 2226 Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ��150 mm*， 2014-07-01 Update
- EN 2424 Aerospace series - Marking of aerospace products*， 2008-05-01 Update
- EN 3280 Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification*， 2011-05-01 Update
- ISO 1132-1 Rolling bearings - Tolerances - Part 1: Terms and definitions
- ISO 15 Rolling bearings - Radial bearings - Boundary dimensions, general plan*， 2017-07-01 Update
- ISO 8075 Aerospace; Surface treatment of hardenable stainless steel parts
DIN EN 4033:2008 history
- 2008 DIN EN 4033:2008-04 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads; German and English version EN 4033:2007
- 2008 DIN EN 4033:2008 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads; German and English version EN 4033:2007
