BS EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, aerosols and solid particles. Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical protective suits
This European Standard specifies the minimum requirements, test methods, marking and information supplied by the manufacturer for the following ventilated and non-ventilated limited use and re-usable chemical protective suits, including component parts such as gloves and boots which can be specified elsewhere.
Type 1 - "gas-tight" chemical protective suit
Type 1a - "gas-tight" chemical protective suit with a breathable air supply independent of the ambient atmosphere, e.g. a self-contained open-circuit compressed air breathing apparatus, worn inside the chemical protective suit.
Type 1b - "gas-tight" chemical protective suit with a breathable air supply, e.g. a self-contained opencircuit compressed air breathing apparatus, worn outside the chemical protective suit.
NOTE As chemical protective suits are used with respiratory devices, special attention should be given to the
adequate selection of respiratory protective equipment. The limiting factors for the use of respirator filters (e.g. oxygen deficiency) should be taken into consideration.
Type 1c - "gas-tight" chemical protective suit with breathable air providing positive pressure, e.g. air lines.
Type 2 -”non-gas tight” chemical protective suit "Non-gas-tight" chemical protective suit with breathable air providing positive pressure.
Specifications for total inward leakage test see annex A.
Specifications for test methods and performance classification for materials, seams, joins and assemblages see annex B.
Specifications for glass paper and glass cloth see annex C.
BS EN 943-1:2002 Referenced Document
EN 136:1998 Respiratory protective devices - Full face masks - Requirements, testing, marking
EN 139:1994 Respiratory Protective Devices - Compressed Air Line Breathing Apparatus for Use with a Full Face Mask@ Half Mask or a Mouthpiece Assembly - Requirements@ Testing@ Marking
EN 270:1994 Respiratory Protective Devices - Compressed Air Line Breathing Apparatus Incorporating a Hood - Requirements, Testing, Marking
EN 340 Protective Clothing - General Requirements*, 2024-04-17 Update
EN 368 Protective clothing; protection against liquid chemicals; test method: resistance of materials to penetration by liquids
BS EN 943-1:2002 history
2020BS EN 943-1:2015+A1:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for Type 1 (gas-tight) chemical protective suits
2016BS EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for Type 1 (gas-tight) chemical protective suits
2002BS EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, aerosols and solid particles. Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical protective suits