Page 1, Subclause 4.2
Replace “or 105 °C ± 5 °C” by “or at any temperature from 105 °C to 160 °C, accurate to ± 5 °C”.
Page 2, Clause 6
At the end of the introductory paragraph, add the following sentence:
“For synthetic rubber latex dried in accordance with 6.1, a higher drying temperature can be used by
agreement between the interested parties in order to shorten the drying time (see Annex B).”
Page 2, Subclause 6.1, second paragraph
In the first sentence, after “heat it at 70 °C ± 2 °C for 16 h or at 105 °C ± 5 °C for 2 h”, insert:
“or at a higher temperature (from 110 °C ± 5 °C to 160 °C ± 5 °C) for a shorter drying time (see Annex B)”.
After “Return the dish to the oven for 30 min if the original drying temperature used was 70 °C ± 2 °C, or for
15 min if the drying temperature was 105 °C ± 5 °C”, add:
“or for 10 min if the drying temperature was from 110 °C ± 5 °C to 160 °C ± 5 °C”.
In the last sentence, add “or 10 min” between “Repeat the drying procedure for periods of 30 min or 15 min”
and “as appropriate”.
Page 4
Add new Annex B.
Page 5
Add new Annex C.
ISO 124:1997/Amd 2:2008 history
2014ISO 124:2014 Latex, rubber - Determination of total solids content
2011ISO 124:2011 Latex, rubber - Determination of total solids content
2008ISO 124:1997/Amd 2:2008 Latex, rubber - Determination of total solids content - Amendment 2: Determination at temperatures higher than 105 °C
2008ISO 124:2008 Latex, rubber - Determination of total solids content
2006ISO 124:1997/Amd 1:2006 Latex, rubber - Determination of total solids content; Amendment 1: Precision data
1997ISO 124:1997 Latex, rubber - Determination of total solids content
1992ISO 124:1992 Rubber latices — Determination of total solids content
1985ISO 124:1985 Rubber latices — Determination of total solids content
1974ISO 124:1974 Rubber latices — Determination of total solids content