IEC 60335-2-94:2008
Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears

Standard No.

IEC 60335-2-94:2008

Release Date

2008

Published By

International Electrotechnical Commission (IEC)

Latest

IEC 60335-2-94:2008

Replace

IEC 61F/704/FDIS:2007 IEC 60335-2-94:2002

Scope

This clause of Part 1 is replaced by the following. This standard deals with the safety of electric powered hand-held scissors type grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c. The term “grass shear” within this standard means “electric powered scissors type grass shear”. So far as is practicable, this standard deals with the common hazards presented by grass shears which are encountered by all persons in the normal use and reasonably foreseeable misuse. NOTE 101 Attention is drawn to the fact that in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. Requirements for chargers are covered by IEC 60335-2-29. EMC and environmental aspects except for noise have not been considered in this standard.

IEC 60335-2-94:2008 Referenced Document

• EN 12449:1999 Copper and Copper Alloys - Seamless, Round Tubes for General Purposes
• IEC 60320 Amendment 3 - Appliance couplers for household and similar general purposes
• ISO 11201:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane
• ISO 11684 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety labels — General principles*， 2023-01-31 Update
• ISO 12100-1 Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology — Amendment 1*， 2009-05-13 Update
• ISO 13852:1996 Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs
• ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room
• ISO 3744:1994 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane
• ISO 3767-1:1998 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols
• ISO 3767-3:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipment
• ISO 8662-1:1988 Hand-held portable power tools; measurement of vibrations at the handle; part 1: general
• ISO/TR 11688-1:1995 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning

IEC 60335-2-94:2008 history

• 2008 IEC 60335-2-94:2008 Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears
• 2002 IEC 60335-2-94:2002 Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears
• 1999 IEC 60335-2-94:1999 Safety of household and similar electrical appliances - Part 2-94: Particular requirements for scissor type grass-shears