DIN EN 88-2:2008 PDF

Scope: This European Standard specifies the safety, construction and performance requirements for pressure regulators (hereafter referred to as regulators) intended for use with gas burners and gas-burning appliances using fuel gases of the 15', 2nd and 3rd families. This European Standard covers type testing only. It also provides additional information for the purchaser and user. This European Standard is applicable to regulators that may be tested independently of gas burners and gas-burning appliances, which have a declared working pressure from above 500 mbar up to and including 5 bar. This European Standard is also applicable to regulators incorporating safety devices. NOTE 1 For safety accessories and pressure accessories, the requirements of EN 13611:2007, Annex F also apply. NOTE 2 Regulators conforming to EN 88-2 fulfil also the requirements of EN 88-1. Regulators intended to be used on pipe work installations for third family gases are also covered by EN 13785 and EN 13786. This European Standard is not applicable to: a) pressure regulators that are connected directly to mains pipe-work or to a container that maintains a standard distribution pressure; b) pressure regulators which use electrical auxiliary energy.

DIN EN 88-2:2008 Referenced Document

EN 13611:2007 Safety and Control Devices for Gas Burners and Gas-Burning Appliances - General Requirements*， 2024-04-18 Update
EN 13787 Elastomers for Gas Pressure Regulators and Associated Safety Devices for Inlet Pressures Up to 100 Bar*， 2024-04-18 Update
EN 549 Rubber materials for seals and diaphragms for gas appliances and gas equipment*， 2023-05-03 Update
EN 60534-1:2005 Industrial-process control valves Part 1: Control valve terminology and general considerations
EN 60534-2-3 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures*， 2016-04-01 Update
EN 682 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
EN ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation ISO 228-1: 2000
EN ISO 6708 Pipework Components - Definition and Selection of DN (Nominal Size) (ISO 6708 : 1995)
ISO 3419 Non-alloy and alloy steel butt-welding fittings
ISO 7-1 Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation TECHNICAL CORRIGENDUM 1

2024 DIN EN 88-2:2024-02 Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa; German version EN 88-2:2022 / Note: DIN EN 88-2 (2008-03) remains valid alongside this sta...
2020 DIN EN 88-2:2020-06 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German and English version prEN 88-2:2020 / Note: Date of issue 2020-05-08*Intended as repl...
2020 DIN EN 88-2:2020 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German and English version prEN 88-2:2020
1970 DIN EN 88-2 E:2015-02 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
2008 DIN EN 88-2:2008-03 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German version EN 88-2:2007 / Note: To be replaced by DIN EN 88-2 (2015-01), DIN EN 88-2 (2...
2008 DIN EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; English version of DIN EN 88-2:2008-03
0000 DIN EN 88-2:2006