BS DD IEC/PAS 61755-3-32:2007
Fibre optic connector optical interfaces - Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres

Standard No.

BS DD IEC/PAS 61755-3-32:2007

Release Date

2007

Published By

British Standards Institution (BSI)

Status

Be replaced 2016-03

Replace By

BS EN 61755-3-32:2016

Latest

BS EN 61755-3-32:2016

Scope

This PAS defines certain dimensional limits that an angled PC end-face multi-fibre rectangular ferrule having two guide-holes for positioning two alignment pins and using a thermoset material with a Young’s modulus of 20-25 GPa has to meet in order to comply with specific requirements for interconnections. Ferrules made from the material specified in this PAS are suitable for use in category C as defined in IEC 61753-1.

BS DD IEC/PAS 61755-3-32:2007 history

• 2016 BS EN 61755-3-32:2016 Fibre optic interconnecting devices and passive components. Connector optical interfaces. Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled thermoset epoxy rectangular ferrules
• 2007 BS DD IEC/PAS 61755-3-32:2007 Fibre optic connector optical interfaces - Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres

BS DD IEC/PAS 61755-3-32:2007 Fibre optic connector optical interfaces - Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres was changed to BS EN 61755-3-32:2016 Fibre optic interconnecting devices and passive components. Connector optical interfaces. Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled thermoset epoxy rectangular ferrules.