DIN EN 15495:2008
Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources; English version of DIN EN 15495:2008-02
- Standard No.
- DIN EN 15495:2008
- Release Date
- 2008
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN 15495:2008-02
- Latest
- DIN EN 15495:2008-02
- Replace
- DIN EN 15495:2006
- Scope
- The purpose of this standard is to describe the methods for conducting an acoustic emission (AE) examination of metallic pressure equipment during acceptance pressure testing using a zone location procedure. General principles of Acoustic Emissions are described in EN 13554. The objectives of the AE testing are to provide 100 % volumetric testing to define and grade zones of the structure which are acoustically active with burst type AE. The method should be regarded as supplementary to planar location. Planar location provides the source identification and characterisation. Zone location may also be applied in such cases where location of AE sources by planar location procedures according to EN 14584 is not possible. The method identifies the need for further evaluation or follow-up by other NDT in localized zones.
DIN EN 15495:2008 Referenced Document
- EN 1330-1:1998 Non Destructive Testing - Terminology - Part 1: List of General Terms
- EN 1330-2:1998 Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods
- EN 1330-9:2000 Non-Destructive Testing - Terminology - Part 9: Terms Used in Acoustic Emission Testing
- EN 13477-1 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description
- EN 13477-2 Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 2: Verification of operating characteristics*， 2021-09-30 Update
- EN 14584 Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources*， 2013-05-01 Update
DIN EN 15495:2008 history
- 2008 DIN EN 15495:2008-02 Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources; German version EN 15495:2007
- 2008 DIN EN 15495:2008 Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources; English version of DIN EN 15495:2008-02
- 0000 DIN EN 15495:2006
