BS EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Noise test code for refuse collection vehicles
This European Standard specifies the method for measuring the noise emission, which is a significant hazard
of refuse collection vehicles (RCVs).
Its goal is to obtain, on one hand, the emission sound pressure level at the operator’s position(s) and, on the
other hand, the sound power level of the RCV during waste collection. It specifies a standardized procedure
for measurement and later comparison of RCVs noise emission, consisting of four operating conditions:
chassis operation, compaction operation, lifting, tilting and lowering operation of a container and dumping of
specified waste into the RCV.
Together with information concerning other parameters, the test results obtained in accordance with this
standard are also applicable to the evaluation of the hazards generated by noise from RCVs.
This standard addresses the uncertainties due to measurement procedures.
This standard deals with the noise measurement conditions for the types of RCVs defined and described in
the standards of the EN 1501 series.
BS EN 1501-4:2007 Referenced Document
EN 1452-2 Plastics Piping Systems for Water Supply - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 2: Pipes
EN 1501-1 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles*, 2021-02-28 Update
EN 1501-2 Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles*, 2021-02-28 Update
EN 840-1 Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design*, 2020-10-31 Update
EN ISO 11201:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane
EN ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology Incorporates Amendment A1: 2009 [Superseded: CEN EN 292-1]*, 2024-04-18 Update
EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles Incorporates Amendment A1: 2009 [Superseded: CEN EN 292-2]*, 2024-04-18 Update
EN ISO 3744:1995 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially Free Field Over a Reflecting Plane (ISO 3744 : 1994)
EN ISO 4871:1996 Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment ISO 4871: 1996
prEN 1501-3 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles*, 2018-02-01 Update
BS EN 1501-4:2007 history
1970BS EN 1501-4:2023 Refuse collection vehicles. General requirements and safety requirements Noise test code for refuse collection vehicles (British Standard)
2007BS EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Noise test code for refuse collection vehicles