DIN EN 15274:2008
General purpose adhesives for structural assembly - Requirements and test methods; English version of DIN EN 15274:2008-01

Standard No.

DIN EN 15274:2008

Release Date

2008

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN 15274:2015

DIN EN 15274 E:2014

Latest

DIN EN 15274:2015-06

Replace

DIN EN 15274:2005

Scope

This European Standard specifies requirements for adhesives intended for use in the creation and general assembly of Icad-bearing, structural elements used in civil engineering works and the construction of buildings. Other than the exceptions stated, it embraces all combinations of bonded materials, used to create or repair Icad-bearing elements. It covers individual adhesives and special purpose kits comprising various combinations of adhesive types and components. It includes test methods and methods of assessment. The performance requirements in this standard may not be applicable to highly specialised applications in extreme environmental conditions, e.g. cryogenic use, nor do they cover specialised circumstances such as accidental impact, e.g. due to traffic or ice, or earthquake loading where specific performance requirements will apply. The intended use is for internal and external construction elements and those cladding and covering elements (excluding ceramic tiles) specifically required, by regulatory authorities, to provide protection from fire in identified building zones, including escape routes. It does not cover: Prefabricated, bonded structural components. Concrete bonded either to itself or steel or a material based on carbon fibre. Wood, when bonded to itself to form a timber based, laminated beam [of the type known as a 'Glulam' beam] intended for use as a major structural, Icad bearing element. Thermoplastics [e.g. polyethylene, polypropylene, polyamide and fluorinated polymers in general] unless they have been specifically prepared [usually through a specialised oxidative process] for bonded assembly on site. Co-axial metallic assemblies comprising fasteners- threaded and otherwise, pipes and tubes. Glass assemblies in structural glazing applications made using silicone adhesives. Those structural elements that are permanently immersed in water.

DIN EN 15274:2008 Referenced Document

• EN 1067 Adhesives - Examination and preparation of samples for testing*， 2024-04-18 Update
• EN 12092 Adhesives - Determination of viscosity*， 2024-04-18 Update
• EN 1242 Adhesives - Determination of isocyanate content*， 2013-03-01 Update
• EN 13999-1 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure*， 2024-04-18 Update
• EN 13999-2 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds*， 2024-04-18 Update
• EN 13999-3 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes*， 2009-04-01 Update
• EN 13999-4 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates*， 2009-04-01 Update
• EN 14022 Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives*， 2010-02-01 Update
• EN 1465 Adhesives - Determination of tensile lap-shear strength of bonded assemblies*， 2009-02-01 Update
• EN 1504-8 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)*， 2016-05-01 Update
• EN 15336 Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified)
• EN 1877-1 Products and systems for the protection and repair of concrete structures - Test methods; reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent
• EN 1877-2 Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxydes resins - Part 2: Determination of amine functions using the total basicity number
• EN 923:2005 Adhesives - Terms and Definitions (Incorporates Amendment A1: 2008)
• EN ISO 11339 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2022)*， 2022-02-16 Update
• EN ISO 11909 Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)
• EN ISO 14896 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)*， 2009-02-01 Update
• EN ISO 15605 Adhesives - Sampling
• EN ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)*， 2012-02-01 Update
• EN ISO 527-3 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets*， 2018-12-01 Update
• EN ISO 75-3 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
• EN ISO 9142 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints Supersedes EN 29142: 1993; ISO 9142: 2003*， 2024-04-18 Update
• EN ISO 9664 Adhesives - Test Methods for Fatigue Properties of Structural Adhesives in Tensile Shear (ISO 9664: 1993)

DIN EN 15274:2008 history

• 2015 DIN EN 15274:2015-06 General purpose adhesives for structural assembly - Requirements and test methods; German version EN 15274:2015
• 2015 DIN EN 15274:2015 General purpose adhesives for structural assembly - Requirements and test methods; German version EN 15274:2015
• 2008 DIN EN 15274:2008 General purpose adhesives for structural assembly - Requirements and test methods; English version of DIN EN 15274:2008-01
• 0000 DIN EN 15274:2005