SAE AMS5598E-2007
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable UNS N07750

Standard No.

SAE AMS5598E-2007

Release Date

2007

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS5598B-2011

Latest

SAE AMS5598F-2019

Scope

This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate procured in inch/pound units. These products have been used typically for parts requiring high strength up to 1500 °F (816 °C) and oxidation resistance up to 1800 °F (982 \mdC) and for bellows and flat springs requiring optimum resistance to relaxation up to 1000 °F (538 °C) with moderate or relatively low stresses, particularly where welding is involved, but usage is not limited to such applications. Parts may be formed, welded if required, and then heat treated to improve strength at elevated temperatures.

SAE AMS5598E-2007 Referenced Document

• ASTM A480/A480M-06 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip*， 2024-04-18 Update
• ASTM E18-07 Standard Test Methods for Rockwell Hardness of Metallic Materials*， 2024-04-18 Update
• ASTM E8-04 Standard Test Methods for Tension Testing of Metallic Materials*， 2024-04-18 Update
• SAE AMS2262 TOLERANCES Nickel and Nickel-Base Alloy Sheet and Strip
• SAE AMS2269F-2006 Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys [Superseded: SAE AMS 2268B]
• SAE AMS2371G-2003 Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock
• SAE AMS2807-1991 Identification Carbon and Low-Alloy Steels@ Corrosion and Heat Resistant Steels and Alloys Sheet@ Strip@ Plate@ and Aircraft Tubing
• SAE AS4194-1991 Sheet and Strip Surface Finish Nomenclature

SAE AMS5598E-2007 history

• 1970 SAE AMS5598F-2019 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 72Ni 15.5Cr 0.95(Cb+Ta) 2.5Ti 0.70Al 7.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
• 2012 SAE AMS5598E-2012 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable
• 2011 SAE AMS5598B-2011 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 72Ni - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
• 2007 SAE AMS5598E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable UNS N07750
• 2000 SAE AMS5598D-2000 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 72Ni 15.5Cr 0.95(Cb+Ta) 2.5Ti 0.70Al 7.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
• 1993 SAE AMS5598C-1993 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate@ 72Ni - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07750)
• 1987 SAE AMS5598B-1987 ALLOY SHEET@ STRIP@ AND PLATE@ CORROSION AND HEAT RESISTANT 72Ni - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70A1 - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07750)
• 1981 SAE AMS5598A-1981 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 72Ni - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
• 1965 SAE AMS5598-1965 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.6Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted