IEC 60079-29-1:2007
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

Standard No.

IEC 60079-29-1:2007

Release Date

2007

Published By

International Electrotechnical Commission (IEC)

Status

Be replaced

Replace By

IEC 60079-29-1:2007/ISH1:2009

Latest

IEC 60079-29-1:2016/AMD1:2020

Replace

IEC 31/695/FDIS:2007 IEC 61779-1:1998 IEC 61779-2:1998 IEC 61779-3:1998 IEC 61779-4:1998 IEC 61779-5:1998

Scope

This part of IEC 60079-29 specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed apparatus for the detection and measurement of flammable gas or vapour concentrations with air. The apparatus, or parts thereof, are intended for use in potentially explosive atmospheres (see 3.1.8) and in mines susceptible to firedamp. This standard is also applicable when an apparatus manufacturer makes any claims regarding any special features of construction or superior performance that exceed these minimum requirements. In these cases, all such claims should be verified and the test procedures should be extended or supplemented, where necessary, to verify the performance claimed by the manufacturer. When verifying the superior performance of one criterion, other performance criteria are not required to meet the standards minimum requirements, however, these reduced claimed performance criteria (as confirmed in the manufactures Installation Manual) should also be verified. (e.g. temperature range of 0 °C to 60 °C; 0 °C to 40 °C at ±10 % accuracy and 40 °C to 60 °C at ±15 % (manufacturers claimed accuracy). The additional tests should be agreed between the manufacturer and test laboratory and identified and described in the test report. This standard is applicable to flammable gas detection apparatus intended to provide an indication, alarm or other output function; the purpose of which is to give a warning of a potential explosion hazard and in some cases, to initiate automatic or manual protective action(s). This standard is applicable to apparatus, including the integral sampling systems of aspirated apparatus, intended to be used for commercial, industrial and non-residential safety applications. This standard does not apply to external sampling systems, or to apparatus of laboratory or scientific type, or to apparatus used only for process control purposes. It also does not apply to open path (line of sight) area monitors. For apparatus used for sensing the presence of multiple gases, this standard applies only to the detection of flammable gas or vapour. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of IEC 60079-29-1 will take precedence.

IEC 60079-29-1:2007 Referenced Document

• IEC 60079-0 Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements*， 2019-06-27 Update
• IEC 60079-29-2 Explosive atmospheres – Part 29-2: Gas detectors – Selection, installation, use and maintenance of detectors for flammable gases and oxygen*， 2015-03-16 Update
• IEC 61000-4-1 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
• IEC 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test*， 2020-09-08 Update
• IEC 61000-4-4 Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test*， 2012-04-30 Update

IEC 60079-29-1:2007 history

• 2020 IEC 60079-29-1:2016/AMD1:2020 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
• 2020 IEC 60079-29-1:2020 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
• 2019 IEC 60079-29-1:2016/ISH2:2019 Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
• 2019 IEC 60079-29-1:2016/ISH1:2019 Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
• 2016 IEC 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
• 2009 IEC 60079-29-1:2007/ISH1:2009 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases; Interpretation sheet 1
• 2007 IEC 60079-29-1:2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-1:2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases has been changed from IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods.

IEC 60079-29-1:2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases has been changed from IEC 61779-2:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air.

IEC 60079-29-1:2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases has been changed from IEC 61779-3:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air.

IEC 60079-29-1:2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases has been changed from IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit.

IEC 60079-29-1:2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases has been changed from IEC 61779-5:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas.