DIN EN ISO 15181-3:2007 PDF

Scope: This part ISO 15181 specifies the apparatus and analytical method for determining the amount of zineb that has been released from an antifouling paint into artificial seawater in accordance with the procedure given in ISO 15181-1. Zineb is released from antifouling paints in the form of ionic ethylene-bis(dithiocarbamate)which is unstable in the marine environment.This part of ISO 15181 describes a method for converting the released species into a stable degradation product,ethylenethiourea,and gives the final calculation for release rate of zineb under the specified laboratory conditions. This part of ISO 15181 is designed to generally allow the concurrent determination of zineb and other biocides that can be released by a given antifouling paint(for example,copper)through the analysis of separate sub-samples of an artificial seawater extract generated in accordance with the procedure given in ISO 15181-1. When used in conjunction with ISO 15181-1,the practical limits on the quantitative measurement of release rates by this method are from 2,9ug.cm-2.d-1.The quantitative measurement of release rates below this range will require the use of an analytical method with a lower limit of quantitation for ethylenethiourea in artificial seawater than the limit specified in 5.1.

DIN EN ISO 15181-3:2007 Referenced Document

ASTM D6442-06 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water*， 2024-04-18 Update
ISO 15181-1:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides
ISO 3696 Water for analytical laboratory use; Specification and test methods

2007 DIN EN ISO 15181-3:2007-10 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract (ISO ...
2007 DIN EN ISO 15181-3:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract (ISO 151