ISO 7240-16:2007
Fire detection and alarm systems - Part 16: Sound system control and indicating equipment

Standard No.
ISO 7240-16:2007
Release Date
2007
Published By
International Organization for Standardization (ISO)
Latest
ISO 7240-16:2007
Replace
IEC 60849:1998
Scope
This part of ISO 7240 specifies the requirements, test methods and performance criteria for sound system control and indicating equipment (s.s.c.i.e.) for use in buildings and structures as part of a sound system for emergency purposes (s.s.e.p.) (item C of Figure 2 in ISO 7240-1:2005). The s.s.c.i.e. is primarily intended to broadcast information for the protection of lives within one or more specified areas in an emergency, to effect a rapid and orderly mobilization of occupants in an indoor or outdoor area. This includes systems using loudspeakers to broadcast voice announcements for emergency purposes, alert signals complying with ISO 7731, and evacuate signals complying with ISO 8201. The overall requirements of an s.s.e.p., especially concerning audibility and intelligibility, are contained within ISO 7240-19. In addition to ensuring compliance with this part of ISO 7240, the manufacturer should also consider the requirements of ISO 7240-19, national regulations, codes and standards that affect the s.s.c.i.e. design and usability. For example, some regulations require certain optional functions to be available on all s.s.c.i.e. installed within the jurisdiction. The use of the equipment for normal sound reinforcement and distribution systems purposes under nonhazardous circumstances is not excluded. This part of ISO 7240 can also be used for the assessment of similar control and indicating equipment for use in systems where the warning-signal broadcast does not include a voice message. This part of ISO 7240 does not apply to systems using only sounders or bells.

ISO 7240-16:2007 Referenced Document

  • EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems (Incorporates Amendment A1: 2014)*2011-06-01 Update
  • IEC 60068-1 Environmental testing - Part 1: General and guidance*2013-10-01 Update
  • IEC 60068-2-1 Environmental testing - Part 2-1: Tests - Test A: Cold
  • IEC 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)*2007-12-01 Update
  • IEC 60268-1 Sound system equipment. Part 1: General
  • IEC 60268-4:2004 Sound system equipment - Part 4: Microphones
  • IEC 60529:2001 Degrees of protection provided by enclosure (IP code)*2024-04-18 Update
  • IEC 60721-3-3:2002 Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
  • ISO 7240-1:2005 Fire detection and alarm systems - Part 1: General and definitions
  • ISO 7240-2:2003 Fire detection and alarm systems - Part 2: Control and indicating equipment
  • ISO 7240-4:2003 Fire detection and alarm systems - Part 4: Power supply equipment
  • ISO 7240-5 Fire detection and fire alarm systems — Part 5: Point type heat detectors*2018-05-03 Update
  • ISO 7240-6 Fire detection and alarm systems - Part 6: Carbon monoxide fire detectors using electro-chemical cells*2011-06-01 Update
  • ISO 7240-7 Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization*2023-06-01 Update
  • ISO 7240-8 Fire detection and alarm systems - Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor*2014-12-01 Update
  • ISO 7731 Ergonomics - Danger signals for public and work areas - Auditory danger signals
  • ISO 8201 Alarm systems — Audible emergency evacuation signal — Requirements*2018-03-01 Update
  • ISO/TS 7240-9 Fire detection and alarm systems - Part 9: Test fires for fire detectors*2012-12-01 Update

ISO 7240-16:2007 history

  • 2007 ISO 7240-16:2007 Fire detection and alarm systems - Part 16: Sound system control and indicating equipment
Fire detection and alarm systems - Part 16: Sound system control and indicating equipment



Copyright ©2024 All Rights Reserved