This European Standard specifies the requirements for flaxboards for general purposes, non-load bearing applications and interior fitments in dry conditions and for flaxboards for non-load bearing applications for use in humid conditions.
NOTE 1 Dry conditions are defined in terms of service class 1 of EN 1995-1-1 which is characterized by the moisture content in the material corresponding to a temperature of 20 °C and a relative humidity of the surrounding air only exceeding 65 % for a few weeks per year. Boards of this type are only suitable for use in biological hazard class 1 of EN 335-3. Humid conditions are defined in terms of service class 2 of EN 1995-1-1, which is characterised by a moisture content in the material corresponding to a temperature of 20 °C and a relative humidity of the surrounding air only exceeding 85 % for a few weeks per year.
NOTE 2 This standard will be referred to in EN 13986, as far as construction applications are concerned.
NOTE 3 Boards in accordance with this standard may be referred to as FB1, FB2, FB3 or FB4 boards.
The values listed in this standard relate to product properties but they are not characteristic values to be used for design calculations.
BS EN 15197:2007 Referenced Document
EN 120 Wood Based Panels - Determination of Formaldehyde Content - Extraction Method Called the Perforator Method
EN 310 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
EN 311 Wood-based panels - Surface soundness - Test method
EN 317 Particleboards and fibreboards; determination of swelling in thickness after immersion in water
EN 318 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
BS EN 15197:2007 history
2007BS EN 15197:2007 Wood-based panels - Flaxboards - Specifications