DIN EN ISO 10535:2007
Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006); English version of DIN EN ISO 10535:2007-04

Standard No.

DIN EN ISO 10535:2007

Release Date

2007

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 10535 E:2020

Latest

DIN EN ISO 10535:2022-03

Replace

DIN EN ISO 10535:2004 DIN EN ISO 10535:1998

Scope

This International Standard specifies requirements and test methods only for hoists and body-support units intended for the transfer of disabled persons as classified in ISO 9999:2002: — 123603 Mobile hoists with sling seats — 12 36 04 Standing mobile hoists — 123606 Mobile hoists with solid seats — 123609 Hoist trolleys — 123612 Stationary hoists fixed to the wall/walls, floor and/or ceiling — 123615 Stationary hoists fixed to, mounted in or on another product — 123618 Stationary free-standing hoists — 123621 Body-support units for hoists This International Standard does not apply to devices that transport persons between two levels (floors) of a building. It does not include methods for the determination of ageing or corrosion of such hoists and units. The requirements of this International Standard are formulated with regard to the needs of both the disabled persons being hoisted and the attendant using the hoist.

DIN EN ISO 10535:2007 Referenced Document

• EN 1021-1 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette*， 2014-08-01 Update
• EN 1021-2 Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent*， 2014-08-01 Update
• EN 12182:1999 Technical Aids for Disabled Persons - General Requirements and Test Methods
• EN 13480-3:2002 Metallic industrial piping - Part 3: Design and calculation Incorporates Amendment A4: 2010
• EN 614-1 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles*， 2009-02-01 Update
• EN 853 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification*， 2015-04-01 Update
• EN 854 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification*， 2015-04-01 Update
• EN 980 Graphical Symbols for Use in the Labelling of Medical Devices
• IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)*， 2024-04-18 Update
• IEC 60601-1-2:2005 Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
• IEC 61000-3-2 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current < 16 A per phase)*， 2024-03-01 Update
• IEC 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection*， 2021-03-25 Update
• IEC 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test*， 2020-09-08 Update
• IEC 61672-1 Electroacoustics - Sound level meters - Part 1: Specifications*， 2013-09-01 Update
• ISO 10993-1 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process*， 2018-08-01 Update
• ISO 14253-1 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications*， 2017-10-01 Update
• ISO 14971 Medical devices - Application of risk management to medical devices*， 2019-12-01 Update
• ISO 3746 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane*， 2010-12-01 Update
• ISO 3758 Textiles — Care labelling code using symbols*， 2023-06-01 Update
• ISO 9999:2002 Technical aids for persons with disabilities - Classification and terminology

DIN EN ISO 10535:2007 history

• 2022 DIN EN ISO 10535:2022-03 Assistive products - Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021); German version EN ISO 10535:2021
• 2022 DIN EN ISO 10535:2022 Aids – lifts for the transfer of people with disabilities – requirements and test procedures
• 1970 DIN EN ISO 10535 E:2020-08 Auxiliary product personnel transfer lift requirements and test methods (draft)
• 2020 DIN EN ISO 10535 E:2020 Draft Document - Hoists for the transfer of disabled persons - Requirements and test methods (ISO/DIS 10535:2020); German and English version prEN ISO 10535:2020
• 2007 DIN EN ISO 10535:2007 Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006); English version of DIN EN ISO 10535:2007-04
• 0000 DIN EN ISO 10535:2004
• 0000 DIN EN ISO 10535:1998