GB/T 10944.2-2006
Tool shanks with 7:24 taper for automatic tool changers Shanks Nos.40, 45 and 50 Part 2: Technical specifications (English Version)

Standard No.

GB/T 10944.2-2006

Language

Chinese, Available in English version

Release Date

2006

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2014-10

Replace By

GB/T 10944.4-2013

GB/T 10944.2-2013

Latest

GB/T 10944.4-2013

GB/T 10944.2-2013

Replace

GB/T 10944-1989

Scope

This part of GB/T 10944 specifies the 7:24 tapered tool shanks for automatic tool changer—conical tolerances and inspection, manufacturability, appearance and surface roughness, material and hardness, marking and packaging of No. 40, 45 and 50 shanks basic requirements. This Part applies to the 7:24 taper tool shank for automatic tool change produced according to GB/T 10944.1.

GB/T 10944.2-2006 history

• 2013 GB/T 10944.1-2013 Tool shanks with 7/24 taper for automatic tool changers.Part 1:Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF
• 2006 GB/T 10944.1-2006 Tool shanks with 7:24 taper for automatic tool changers Shanks Nos.40, 45 and 50 Part 1: Dimensions and conicity tolerances
• 1989 GB/T 10944-1989 Tool shanks with 7:24 taper for automatic tool changers--Shanks Nos.40,45 and 50

GB/T 10944.2-2006 Tool shanks with 7:24 taper for automatic tool changers Shanks Nos.40, 45 and 50 Part 2: Technical specifications was changed to GB/T 10944.4-2013 Tool shanks with 7/24 taper for automatic tool changers.Part 4:Technical specifications for shanks.

GB/T 10944.2-2006 -All Parts