These requirements cover all-thermoplastic Type MTW, 600-V, machine-tool wires and cables for use as specified in the National Electrical Code (ANSI/NFPA 70), and in the National Fire Protection Association Electrical Standard for Industrial Machinery (ANSI/NFPA 79). These wires and cables comply with a flame test and are for use at 90鳦 (194鳩) and lower temperatures in dry locations and at 60鳦 (140鳩) and lower temperatures where exposed to moisture, oil, or coolants such as cutting oils and the like. The two single-conductor constructions covered are described. Both are PVC-insulated and one includes a nylon jacket over the insulation. The multiple-conductor constructions covered consist of assemblies of these single-conductor constructions (sizes and styles may be mixed) enclosed by a PVC jacket.
2018UL 1063 BULLETIN-2018 UL Standard for Safety Machine-Tool Wires and Cables (COMMENTS DUE: JUNE 11@ 2018)
2017UL 1063 BULLETIN-2017 UL Standard for Safety Machine-Tool Wires and Cables (COMMENTS DUE: JULY 3@ 2017)
2017UL 1063-2017 UL Standard for Safety Machine-Tool Wires and Cables (Eighth Edition; Reprint with Revisions Through and Including July 2@ 2018)
2016UL 1063 BULLETIN-2016 UL Standard for Safety Machine-Tool Wires and Cables (COMMENTS DUE: DECEMBER 19@ 2016)
2012UL 1063 BULLETIN-2012 UL Standard for Safety Machine-Tool Wires and Cables (COMMENTS DUE: May 07@ 2012)
2011UL 1063 BULLETIN-2011 UL Standard for Safety Machine-Tool Wires and Cables (COMMENTS DUE: September 06@ 2011)
2006UL 1063 BULLETINS-2006 UL Standard for Safety Machine-Tool Wires and Cables (10/06/2006 (20p); 07/12/2006 (20p))
2006UL 1063-2006 UL Standard for Safety Machine-Tool Wires and Cables Seventh Edition
2000UL 1063 BULLETINS-2000 UL Standard for Safety Machine-Tool Wires and Cables (10/13/2000 (80p); 09/21/2000 (10p); 08/16/2000 (2p); 02/25/2000 (22p))