AS/NZS 61000.3.2:2003 Electromagnetic compatibility (EMC) Part 3.2: Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase)
This part of AS/NZS 61000 deals with the limitation of harmonic currents injected into the public supply system.
It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions.
Harmonic components are measured according to annexes A and B.
This part of AS/NZS 61000 is applicable to electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public lowvoltage distribution systems.
Arc weling equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard.
Arc weling equipment intended for professional use, as specified in IEC 606974-1, is exclued from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4.
The tests according to this standard are type tests. Test conditions for particular equipment are given in annex C.
For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet been considered.
AS/NZS 61000.3.2:2003 history
1970AS/NZS 61000.3.2:2013 Electromagnetic Compatibility (EMC) Limits Harmonic current emission limits (device input current = 16 A per phase)
2003AS/NZS 61000.3.2:2003 Electromagnetic compatibility (EMC) Part 3.2: Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase)