DIN EN 14879-3:2007 PDF

Standard No.: DIN EN 14879-3:2007
Release Date: 2007
Published By: German Institute for Standardization
Status: Be replaced
Replace By: DIN EN 14879-3:2007-02
Latest: DIN EN 14879-3:2007-02
Replace: DIN 28052-1:2001 DIN 28052-3:1994 DIN 28052-6:2001 DIN EN 14879-3:2004

Scope: This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: — to protect the component from damaging effects of aggressive substances; — to protect waters (e.g. ground water) from harmful substances; — to protect the charge from becoming contaminated by components released from the substrate material; — to achieve a particular surface properties. The different coating systems are: a) impregnation, seals, thin coatings (applied by brushing, spraying or rolling); b) high-build coatings (applied by brushing, spraying, rolling, trowelling or pouring (self-levelling)); c) laminate coatings; d) resinous screed; e) mastic asphalt screed with a waterproofing layer; f) combinations of the above coatings. Table 1 shows the coating methods to be employed for various types of concrete members. Handling of aggressive or water pollutant materials is understood to include: 1) storage; 2) filling; 3) loading and unloading; 4) manufacture; 5) treatment; 6) use.

DIN EN 14879-3:2007 Referenced Document

EN 12350-1:1999 Testing fresh concrete - Part 1: Sampling
EN 1766 Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Reference Concretes for Testing*， 2017-02-01 Update
EN 228 Automotive fuels - Unleaded petrol - Requirements and test methods*， 2024-04-18 Update
EN 59 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester*， 2016-02-01 Update
EN 590 Automotive fuels - Diesel - Requirements and test methods*， 2014-03-01 Update

2007 DIN EN 14879-3:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components; German version EN 14879-3:2006
2007 DIN EN 14879-3:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components; German version EN 14879-3:2006
0000 DIN EN 14879-3:2004
2001 DIN 28052-6:2001 Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 6: Test methods
1970 DIN 28052-3:1994