DIN EN 1993-3-2:2007
Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys; German version EN 1993-3-2:2006

Standard No.

DIN EN 1993-3-2:2007

Release Date

2007

Published By

German Institute for Standardization

Status

Withdraw

Replace By

DIN EN 1993-3-2:2010

DIN EN 1993-3-2 NA:2009

Latest

DIN EN 1993-3-2/NA:2017-01

Scope

(1) This Part 3.2 of EN 1993 applies to the structural design of vertical steel chimney of circular or conical section. It covers chimneys that are cantilevered, supported at intermediate levels or guyed. (2) The provisions in this Part supplement those given in Part 1.1 of EN 1993. (3) This Part 3.2 is concerned only with the requirement for resistance (strength, stability and fatigue) of steel chimney. NOTE: In this context (i.e. resistance) the term chimney refers to: a) chimney structurs b) the steel cylindrical elements of towers c) the steel cylindrical shafts of guyed masts (4) For provisions concerning aspects, such as chemical attack, thermo-dynamical performance or thermal insulation see EN 13084-1. For the design of liners see EN 13084-6. (5) Foundations in reinforced concrete for steel chimneys are covered in EN 1992 and EN 1997. See also 4.7 and 5.4 of EN 13084-1. (6) Wind loads are specified in EN 1991-1-4. NOTE: Procedures for the wind response of guyed chimneys are given in annex B of EN 1993-3-1. (7) This Part does not cover special provisions for seismic design, which are given in EN 1998-6. See also 5.2.4.1 of EN 13084-1. (8) Provisions for the guys and their attachments are given in EN 1993-3-1 and EN 1993-1-11. (9) For the execution of steel chimney, reference shoule be made to EN 1090, Part 2 and EN 13084-1. NOTE: Execution is covered to the extent that is necessary to indicate the quality of the construction materials and products that should be used and the standard of workmanship on site needed to comply with the assumptions of the design rules. (10) The following subjects are dealt with in EN 1993-3-2: Section 1: General Section 2: Basis of design Section 3: Materials Section 4: Durability Section 5: Structural analysis Section 6: Ultimate limit states Section 7: Serviceability limit states Section 8: Design assisted by testing Section 9: Fatigue

DIN EN 1993-3-2:2007 history

• 2017 DIN EN 1993-3-2/NA:2017-01 National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys / Note: Applies in conjunction with DIN EN 1993-3-2 (2010-12).
• 1970 DIN EN 1993-3-2 NA A1 E:2016-04
• 2010 DIN EN 1993-3-2:2010-12 Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys; German version EN 1993-3-2:2006
• 2010 DIN EN 1993-3-2:2010 Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys; German version EN 1993-3-2:2006
• 2007 DIN EN 1993-3-2:2007 Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys; German version EN 1993-3-2:2006