(1)EN 1993-1-3 gives design requirements for cold-formed members and sheeting. It applies to
cold-formed steel products made from coated or uncoated hot or cold rolled sheet or strip, that have
been cold-formed by such processes as cold-rolled forming or press-braking. It may also be used for the design
of profiled steel sheeting for composite steel and concrete slabs at the construction stage, see EN 1994. The
execution of steel structures made of cold-formed members and sheeting is covered in EN 1090.
(2) Methods are also given for stressed-skin design using steel sheeting as a structural diaphragm.
(3) This part does not apply to cold-formed circular and rectangular structural hollow sections supplied to EN
10219, for which reference should be made to EN 1993-1-1 and EN 1993-1-8.
(4) EN 1993-1-3 gives methods for design by calculation and for design assisted by testing. The methods for
design by calculation apply only within stated ranges of material properties and geometrical proportions for
which sufficient experience and test evidence is available. These limitations do not apply to design assisted by
testing.
(5) EN 1993-1-3 does not cover load arrangement for testing for loads during execution and maintenance.
(6) The calculation rules given in this standard are only valid if the tolerances of the cold formed members
comply with EN 1090-2
BS EN 1993-1-3:2006 Referenced Document
EN 10002 Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
EN 10025-1 Hot rolled products of structural steels - Part 1: General technical delivery conditions*, 2024-04-18 Update
EN 10025-2 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-4 Hot-rolled products of structural steel. Part 4: Technical delivery conditions for thermomechanically rolled weldable fine-grained structural steel including modification A1, 2022*, 2022-12-01 Update
EN 10025-5 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10143 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10149 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels*, 2013-09-01 Update
EN 10204 Metallic products - Types of inspection documents*, 2024-04-18 Update
EN 10268 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions*, 2013-09-01 Update
EN 10292 Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions*, 2007-03-01 Update
EN 10326 Continuously hot-dip coated strip and sheet of structural steels Technical delivery conditions
EN 10327 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions Supersedes EN 10142:2000, EN 10154:2002, EN 10214:1995, and EN 10215:1995
EN 1090-2 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1993 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures*, 2009-07-01 Update
EN 1994 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
EN 508-1 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel*, 2021-09-30 Update
EN ISO 10684 Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)*, 2009-04-08 Update