GB 19212.5-2006 Safety of power transformers, power supply units and similar. Part 5: Particular requirements for isolating transformers for general use (English Version)
This chapter of GB 19212.1-2003 is replaced by the following content: This part of GB 19212 applies to standing or mobile, single-phase or multi-phase, air-cooled, supporting or other application isolation transformers, whose rated power supply voltage does not exceed AC 1000V, rated frequency not exceeding 500Hz, rated output not exceeding: - for single-phase transformers: 25kVA; - for multi-phase transformers, 40kVA; Considered as a special transformer and subject to agreement between purchaser and supplier. No-load output voltage or rated output voltage does not exceed AC 500V or ripple-free DC 708V. No-load output voltage and (or) rated output voltage should exceed AC 50V (or) ripple-free DC 120V. This part also applies to transformers used in conjunction with special equipment within the scope specified by the relevant technical committees. This section applies to dry-type transformers. Windings can be sealed or unsealed.
GB 19212.5-2006 Referenced Document
GB 19212.1-2003 Safety of power transformers,power supply units and similar--Part 1: General requirements and tests
GB 19212.5-2006 history
2011GB 19212.5-2011 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1100 V.Part 5:Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
2006GB 19212.5-2006 Safety of power transformers, power supply units and similar. Part 5: Particular requirements for isolating transformers for general use