EN ISO 14122-2:2001 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways Incorporates Amendment A1: 2010
EN IS0 14122 defines the general requirements for safe access to machines mentioned in EN 292-2. Part 1 of EN
IS0 14122 gives advice about the correct choice of access means when the necessary access to the machine is
not possible directly from the ground level or from a floor.
This part of EN IS0 14122 applies to all machinery (stationary and mobile) where fixed means of access are
necessary.
This pari of EN IS0 14122 applies to working platforms and walkways which are a part of a machine.
This part of EN IS0 14122 may also apply to working platforms and walkways to that pari of the building where the
machine is installed, providing the main function of that part of the building is to provide a means of access to the
machine.
NOTE
those cases the possible relevant national or other regulations should be taken into account.
This part of EN IS0 14122 may be used also for means of access which are outside the scope of this standard. In
This part of EN IS0 14122 applies also to working platforms and walkways specific to the machine which are not
permanently fixed to the machine and which may be removed or moved to the side for some operations of the
machine (e.9. changing tools in a large press).
This part of EN IS0 14122 does not apply to lifts, to moveable elevating platforms or other devices specially
designed to lift persons between two levels.
EN 292-1 Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology
EN 294 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
EN 547-1 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery*， 2008-09-01 Update
EN 547-2 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings*， 2008-09-01 Update
EN 547-3 Safety of machinery - Human body measurements - Part 3: Anthropometric data*， 2008-09-01 Update
EN ISO 14122-2:2001 history
2016EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
2001EN ISO 14122-2:2001 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways Incorporates Amendment A1: 2010