SAE MA2047C-1997
NUT, RETAINED, FLARELESS, METRIC
Home
SAE MA2047C-1997
Standard No.
SAE MA2047C-1997
Release Date
1997
Published By
Society of Automotive Engineers (SAE)
Status
Be replaced
Replace By
SAE MA2047C-2015
Latest
SAE MA2047C-2015
Scope
NUT, RETAINED, FLARELESS, METRIC.
SAE MA2047C-1997 Referenced Document
ASME Y14.5-1966
Dimensioning and Tolerancing
ISO 6771:1987
Aerospace; Fluid systems and components; Pressure and temperature classifications
ISO 7169:1993
Aerospace fluid systems; separable tube fittings for 24
cone; general specification
SAE AMS2486B-1986
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488C-1994
Anodic Treatment@ Titanium and Titanium Alloys
SAE AMS4124C-1997
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged UNS A97075
SAE AMS4928N-1993
Titanium Alloy Bars@ Wire@ Forgings@ and Rings 6Al - 4V Annealed (UNS R56400)
SAE AMS5639G-1996
Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Tubing@ and Rings 19Cr - 10Ni Solution Heat Treated (UNS S30400)
SAE AMS5645N-1995
Steel@ Corrosion and Heat Resistant@ Bars@ Wire@ Forgings@ Tubing@ and Rings 18Cr - 10Ni - 0.40Ti (SAE 30321) Solution Heat Treated (UNS S32100)
SAE AMS5648J-1996
Steel@ Corrosion and Heat Resistant@ Bars@ Wire@ Forgings@ Tubing@ and Rings 17Cr - 12Ni - 2.5Mo Solution Heat Treated (UNS S31600)
SAE AS478J-1996
Identification Marking Methods
SAE M
Design Guide for Involute Splines
SAE MA2047C-1997 history
2015
SAE MA2047C-2015
NUT, RETAINED, FLARELESS, METRIC
1997
SAE MA2047C-1997
NUT, RETAINED, FLARELESS, METRIC
1996
SAE MA2047B-1996
Nut@ Retained@ Flareless@ Metric
1992
SAE MA2047A-1992
NUT, SWIVEL, WIRED ON, FLARELESS, METRIC
1986
SAE MA2047-1986
NUT, SWIVEL, WIRED ON
Copyright ©2024 All Rights Reserved