SAE AMS5698G-2003
Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper, Precipitation Hardenable UNS N07750

Standard No.

SAE AMS5698G-2003

Release Date

2003

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS5698G-2013

Latest

SAE AMS5698H-2022

Scope

This specification covers a corrosion and heat resistant nickel alloy in the form of round, square, and flat wire 0.500 inch (12.70 mm) and under in nominal diameter or thickness. This wire has been used typically for helical springs requiring optimum resistance to relaxation up to 1000 °F (538 °C) with moderate or relatively low stresses, but usage is not limited to such applications.

SAE AMS5698G-2003 Referenced Document

• ASTM E8-01 Standard Test Methods for Tension Testing of Metallic Materials*， 2024-04-18 Update
• ASTM E8-03 Standard Test Methods for Tension Testing of Metallic Materials*， 2024-04-18 Update
• ASTM E8M-01 Standard Test Methods for Tension Testing of Metallic Materials [Metric]*， 2024-04-18 Update
• ASTM E8M-03 Standard Test Methods for Tension Testing of Metallic Materials [Metric]*， 2003-07-10 Update
• SAE AMS2269E-1994 Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys
• SAE AMS2371F-1997 Quality Assurance Sampling and Testing Corrosion and Heat Resistant Steels and Alloys Wrought Products and Forging Stock

SAE AMS5698G-2003 history

• 2022 SAE AMS5698H-2022 Nickel Alloy, Corrosion- and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable
• 2013 SAE AMS5698G-2013 Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper, Precipitation Hardenable
• 2003 SAE AMS5698G-2003 Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper, Precipitation Hardenable UNS N07750
• 2000 SAE AMS5698F-2000 Nickel Alloy, Corrosion and Heat Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper, Precipitation Hardenable
• 1994 SAE AMS5698F-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper@ Precipitation Hardenable (UNS N07750)
• 1989 SAE AMS5698E-1989 ALLOY WIRE@ CORROSION AND HEAT RESISTANT 72Ni - 15.5Cr - 0.95(Cb+Ta) - 2.5Ti - 0.70A1 - 7.oFe No. 1 Temper@ Precipitation Hardenable (UNS N07750)
• 1983 SAE AMS5698D-1983 ALLOY WIRE@ CORROSION AND HEAT RESISTANT 72Ni - 15.5Cr - 0.95(Cb+Ta) - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper (UNS N07750)
• 1977 SAE AMS5698C-1977 ALLOY WIRE, CORROSION AND HEAT RESISTANT 72Ni - 15.5Cr - 0.95(Cb+Ta) - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper
• 1963 SAE AMS5698B-1963 ALLOY WIRE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 7Fe - 2.3Ti - 1(Cb+Ta) - 0.7Al No. 1 Temper
• 1957 SAE AMS5698A-1957 ALLOY WIRE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 7Fe - 2.3Ti - 1(Cb+Ta) - 0.7Al No. 1 Temper
• 1953 SAE AMS5698-1953 ALLOY WIRE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 7Fe - 2.3Ti - 1(Cb+Ta) - 0.7Al