SAE J2488-2006
SAE No. 2 Friction Test Machine 6000 r/min Stepped Power Test

Standard No.
SAE J2488-2006
Release Date
2006
Published By
Society of Automotive Engineers (SAE)
Status
 2013-03
Replace By
SAE J2488-2013
Latest
SAE J2488-2019
Scope
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 6000 r/min Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 6000 r/min and is intended as a standard procedure for common use by both suppliers and end users. The only variables selected by the supplier or user of the friction system are: a. Friction Material; b. Fluid; c. Reaction Plates These three variables must be clearly identified when reporting the results of using this test. If any of the test parameters or system hardware as described in this document are changed, other than the friction material, test fluid, or reaction plates, the data may not be reported as having been obtained using this document.

SAE J2488-2006 history

  • 2019 SAE J2488-2019 SAE No. 2 Friction Test Machine 6000 rpm Stepped Power Test
  • 2013 SAE J2488-2013 SAE No. 2 Friction Test Machine 6000 r/min Stepped Power Test
  • 2006 SAE J2488-2006 SAE No. 2 Friction Test Machine 6000 r/min Stepped Power Test
  • 2000 SAE J2488-2000 SAE No.2 Friction Test Machine 6000 r/min Stepped Power Test



Copyright ©2024 All Rights Reserved