ISO 13628-2:2006
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications

Standard No.

ISO 13628-2:2006

Release Date

2006

Published By

International Organization for Standardization (ISO)

Status

Be replaced

Replace By

ISO 13628-2:2006/cor 1:2009

Latest

ISO 13628-2:2006/cor 1:2009

Scope

This part of ISO 13628 defines the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of flexible pipes, with reference to existing codes and standards where applicable. See ISO 13628-11 for guidelines on the use of flexible pipes and ancillary components. This part of ISO 13628 applies to unbonded flexible pipe assemblies, consisting of segments of flexible pipe body with end fittings attached to both ends. This part of ISO 13628 does not cover flexible pipes of bonded structure. This part of ISO 13628 does not apply to flexible pipe ancillary components. Guidelines for bend stiffeners and bend restrictors are given in Annex B. NOTE 1 Guidelines for other components are given in ISO 13628-11. This part of ISO 13628 does not apply to flexible pipes that include non-metallic tensile armour wires. Pipes of such construction are considered as prototype products subject to qualification testing. The applications addressed by this part of ISO 13628 are sweet and sour service production, including export and injection applications. Production products include oil, gas, water and injection chemicals. This part of ISO 13628 applies to both static and dynamic flexible pipes used as flowlines, risers and jumpers. This part of ISO 13628 does not apply to flexible pipes for use in choke-and-kill line applications. NOTE 2 See API Specification 16C for choke-and-kill line applications. NOTE 3 ISO 13628-10 provides guidelines for bonded flexible pipe.

ISO 13628-2:2006 Referenced Document

• ISO 10423:2003 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment
• ISO 10474:1991 Steel and steel products; inspection documents
• ISO 11357-1 Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles*， 2023-02-17 Update
• ISO 11357-4 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity*， 2021-01-31 Update
• ISO 1183 Plastics; Methods for determining the density and relative density of non-cellular plastics
• ISO 178 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers*， 2019-04-01 Update
• ISO 179 Plastics — Determination of Charpy impact strength — Technical Corrigendum 1
• ISO 180 Plastics. Determination of Izod impact strength*， 2023-06-07 Update
• ISO 306 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)*， 2022-11-18 Update
• ISO 307 Plastics — Polyamides — Determination of viscosity number*， 2019-04-26 Update
• ISO 3384 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
• ISO 527-1 Plastics — Determination of tensile properties — Part 1: General principles*， 2019-07-26 Update
• ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics*， 2012-02-01 Update
• ISO 604 Plastics - Determination of compressive properties
• ISO 62 Plastics - Determination of water absorption*， 2008-02-01 Update
• ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method*， 2014-10-01 Update
• ISO 6507-1 Metallic materials — Vickers hardness test — Part 1: Test method*， 2023-08-01 Update
• ISO 6508-1 Metallic materials — Rockwell hardness test — Part 1: Test method*， 2023-12-13 Update
• ISO 75-1 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics*， 2020-02-28 Update
• ISO 75-2 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite*， 2013-04-01 Update
• ISO 8457-2 Steel wire rod; part 2: quality requirements for unalloyed steel wire rods for conversion to wire
• ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
• ISO 8692 Water quality - Fresh water algal growth inhibition test with unicellular green algae*， 2012-02-01 Update
• ISO 899-1 Plastics - Determination of creep behaviour - Part 1: Tensile creep*， 2017-09-01 Update
• ISO 9352 Plastics - Determination of resistance to wear by abrasive wheels*， 2012-04-01 Update
• ISO 974 Plastics - Determination of the brittleness temperature by impact

ISO 13628-2:2006 history

• 2009 ISO 13628-2:2006/cor 1:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications; Technical Corrigendum 1
• 2006 ISO 13628-2:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications
• 2000 ISO 13628-2:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications