DIN EN ISO 21787:2006
Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); English version of DIN EN ISO 21787:2006-06

Standard No.

DIN EN ISO 21787:2006

Release Date

2006

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 21787 Berichtigung 1:2008

Latest

DIN EN ISO 21787:2019-12

Replace

DIN 3441-1:1989 DIN 3441-4:1978 DIN 3442-1:1987 DIN EN ISO 21787:2004

Scope

This Standard specifies requirements and tests for globe valves of thermoplastics materials for isolating and control service. This Standard is applicable to hand or power operated valves to be installed in industrial pipe systems.

DIN EN ISO 21787:2006 Referenced Document

• ISO 5210:1991 Industrial valves; multi-turn valve actuator attachments
• ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
• ISO 8233:1988 Thermoplastics valves; torque; test method
• ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs

DIN EN ISO 21787:2006 history

• 2019 DIN EN ISO 21787:2019-12 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006 + Amd 1:2019); German version EN ISO 21787:2006 + A1:2019
• 2019 DIN EN ISO 21787:2019 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006 + Amd 1:2019) (includes Amendment :2019)
• 1970 DIN EN ISO 21787 A1 E:2018-07
• 2018 DIN EN ISO 21787/A1 E:2018 Draft Document - Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/DAM 1:2018); German and English version EN ISO 21787:2006/prA1:2018
• 2008 DIN EN ISO 21787 Berichtigung 1:2008 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); German version EN ISO 21787:2006, Corrigenda to DIN EN ISO 21787:2006-06
• 2006 DIN EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); English version of DIN EN ISO 21787:2006-06
• 0000 DIN EN ISO 21787:2004
• 0000 DIN 3441-1:1989
• 0000 DIN 3442-1:1987
• 1978 DIN 3441-4:1978 Fittings made of hard PVC (hard polyvinyl chloride); Requirements and testing

DIN EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); English version of DIN EN ISO 21787:2006-06 has been changed from DIN 3441-4:1978 Fittings made of hard PVC (hard polyvinyl chloride); Requirements and testing.