HJ/T 179-2005
Flue gas limestone/limegypsum desulfurization project technical specification of thermal power plant (English Version)
- Standard No.
- HJ/T 179-2005
- Language
- Chinese, Available in English version
- Release Date
- 2005
- Published By
- Professional Standard - Environmental Protection
- Status
- 2018-05
- Replace By
- HJ 179-2018
- Latest
- HJ 179-2018
- Scope
- This specification is applicable to the limestone/lime-gypsum method for newly built, expanded and reconstructed coal-fired, gas-fired, oil-fired thermal power plant boilers or heating boilers with a capacity of 400t/h (unit capacity of 100MW) and above, or for the addition of existing boilers. Planning, design, review, procurement, construction and installation, commissioning, acceptance and operation management of flue gas desulfurization projects. For boilers below 400t/h, refer to this when the flue gases of several boilers are combined for treatment, or when other industrial furnaces use limestone/lime-gypsum wet desulfurization technology.
HJ/T 179-2005 Referenced Document
- GB 12348 Emission standard for industrial enterprises noise at boundary*， 2008-08-19 Update
- GB 12801 General principles for the requirements of safety and health in production process
- GB 13223 Emission standard of air pollutants for thermal power plants*， 2011-07-29 Update
- GB 18599 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill*， 2020-12-24 Update
- GB 8978 Integrated wastewater discharge standard
HJ/T 179-2005 history
- 2018 HJ 179-2018 General technical specification for limestone/lime-gypsum wet flue gas desulfurization engineering
- 2005 HJ/T 179-2005 Flue gas limestone/limegypsum desulfurization project technical specification of thermal power plant
HJ/T 179-2005 Flue gas limestone/limegypsum desulfurization project technical specification of thermal power plant was changed to HJ 179-2018 General technical specification for limestone/lime-gypsum wet flue gas desulfurization engineering.
