This International Standard lays down the mounting dimensions required for the interchangeability of
accessories for the 16 MPa [160 bar1)] medium series cylinders in accordance with ISO 6020-1 and for the
25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed
specifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this does
not limit their application.
This International Standard covers the following accessories, identified in accordance with ISO 6099:
- AP2 — rod clevis, female thread (see Figure 1 and Table 1);
- AF3 — rod flange, circular (see Figure 2 and Table 2);
- AB4 — clevis bracket, straight (see Figure 3 and Table 3);
- AB3 — clevis bracket, in angle (see Figure 4 and Table 4);
- AT4 — trunnion bracket (see Figure 5 and Table 5);
- AA8 — pivot pin, plain or spherical bearing (cotter pin or snap ring type) (see Figure 6 and Table 6);
- AP6 — rod eye spherical, female thread (see Figure 7 and Table 7);
- AP4 — rod eye plain, female thread (see Figure 8 and Table 8).
These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design
of these accessories is based on the maximum forces resulting from the specified internal diameters of the
cylinders and pressures according to ISO 3320 and ISO 3322.
This International Standard applies only to the dimensional criteria of products manufactured in conformity
with this International Standard; it does not apply to their functional characteristics.
ISO 8132:2006 Referenced Document
ISO 286-2 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1*, 2013-08-01 Update
ISO 3320 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series*, 2013-12-01 Update
ISO 3322 Fluid power systems and components; Cylinders; Nominal pressures
ISO 5598 Fluid power systems and components — Vocabulary*, 2020-01-06 Update
ISO 6020-1 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series*, 2007-08-01 Update
ISO 6022 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series*, 2006-02-01 Update
ISO 6099 Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types*, 2018-08-31 Update
ISO 8132:2006 history
2022ISO 8132:2022 Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
2014ISO 8132:2014 Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
2006ISO 8132:2006 Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories
1986ISO 8132:1986 Hydraulic fluid power; Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series; Mounting dimensions for accessories