GB/T 19992-2005 (English Version) PDF

Standard No.: GB/T 19992-2005
Language: Chinese, Available in English version
Release Date: 2005
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest: GB/T 19992-2005

Scope: This standard specifies the terminology of each part of the rocker arm circular saw machine (hereinafter referred to as the machine tool). At the same time, referring to GB/T 17421.1-1998, it specifies the geometric accuracy inspection of the machine tool and gives the corresponding tolerance. It is suitable for general purposes. , Machine tools with ordinary precision sawing slide travel less than or equal to 800mm. The accuracy of the machine tool with the stroke of the saw blade sliding seat greater than 800mm should be determined by the agreement between the user and the manufacturer. This standard only stipulates the accuracy inspection of machine tools, and is not applicable to the operation tests of machine tools (such as vibration, abnormal noise, crawling of parts, etc.), nor is it applicable to the characteristic inspection of machine tools (such as speed, feed rate, etc.), these The inspection should generally be carried out before the accuracy inspection of the machine tool. This standard does not make rigid regulations on the inspection of the working accuracy of machine tools. It shall be specified separately in the prior agreement between the user and the manufacturer. This standard applies to those machine tools indicated in 12.131.122 of ISO 7984:1988.

GB/T 19992-2005 Referenced Document

GB/T 17421.1-1998 Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
ISO 7984:1988 Woodworking machines; technical classification of woodworking machines and auxiliary machines for woodworking

2005 GB/T 19992-2005 Woodworking machines.Radial circular saws.Nomenclature and acceptance conditions