These requirements cover tests of opaque and clear organic coatings intended for application to exterior and interior surfaces of steel enclosures of outdoor-use electrical equipment for protection of the metal against atmospheric corrosion. It covers organic coatings consisting of one or more coats and their system of application to steel or zinc-coated steel with specified pretreatment, application, bake or cure schedule, and minimum dry-film thickness. The final acceptance of a coating is dependent upon its use in a complete product that complies with the requirements in the standard applicable to such a product. The requirements may be applied to other organic or nonmetallic coatings if found to be appropriate. The flammability or toxicity risks associated with the coating materials in any form, or the acceptability of the materials for uses other than indicated, are not within the scope of these requirements. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.
UL 1332-2005 history
1970UL 1332-2020 Organic coatings for steel enclosures for outdoor use electrical equipment
1970UL 1332-2016 Organic coatings for steel enclosures of outdoor electronic equipment
2015UL 1332 BULLETIN-2015 UL Standard for Safety Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment (COMMENTS DUE: July 13@ 2015)
2010UL 1332 BULLETIN-2010 UL Standard for Safety Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment (COMMENTS DUE: March 22@ 2010)
2005UL 1332-2005 UL Standard for Safety Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment Fourth Edition
2004UL 1332 BULLETIN-2004 UL Standard for Safety Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment
1995UL 1332-1995 Organic coatings for steel enclosures for outdoor use electrical equipment
1990UL 1332-1990 Organic coatings for steel enclosures for outdoor-use electrical equipment