DIN EN ISO 13000-1:2006 PDF

Standard No.: DIN EN ISO 13000-1:2006
Release Date: 2006
Published By: German Institute for Standardization
Status: Be replaced 2020-08
Replace By: DIN EN ISO 13000-1:2020
Latest: DIN EN ISO 13000-1:2006; DIN EN ISO 13000-1:2020; DIN EN ISO 13000-1:2021-11

Scope: This part of ISO 13000 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products, which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and as provided in ISO 12086-1, may contain up to 1% of a comonomer The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application NOTE References to other standard specifications for semi-finished products made from polytetrafluoroethylene are listed in Annex A for information.

DIN EN ISO 13000-1:2006 history

2021 DIN EN ISO 13000-1:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021); German version EN ISO 13000-1:2021
2020 DIN EN ISO 13000-1:2020 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO/DIS 13000-1:2020); German and English version prEN ISO 13000-1:2020
2006 DIN EN ISO 13000-1:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005); English version of DIN EN ISO 13000-1:2006-02