IEC 61000-3-2:2005
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)

Standard No.

IEC 61000-3-2:2005

Release Date

2005

Published By

International Electrotechnical Commission (IEC)

Status

Be replaced 2009-04

Replace By

IEC 61000-3-2:2005/AMD1:2008

Latest

IEC 61000-3-2:2018/AMD2:2024

Scope

This part of IEC 61000 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. Harmonic components are measured according to Annexes A and B. This part of IEC 61000 is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C. For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yet been considered. NOTE The words apparatus, appliance, device and equipment are used throughout this standard. They have the same meaning for the purpose of this standard.

IEC 61000-3-2:2005 history

• 1970 IEC 61000-3-2:2018/AMD2:2024
• 2024 IEC 61000-3-2:2024 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current < 16 A per phase)
• 2018 IEC 61000-3-2:2018/AMD1:2020/ISH1:2021 Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
• 2020 IEC 61000-3-2:2018/AMD1:2020 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
• 2020 IEC 61000-3-2:2020 Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
• 0000 IEC 61000-3-2:2018 RLV
• 2014 IEC 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
• 2009 IEC 61000-3-2:2005/AMD2:2009/COR1:2009 Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
• 2009 IEC 61000-3-2/COR1:2009 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase); Correction 1
• 2009 IEC 61000-3-2:2009 Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
• 2008 IEC 61000-3-2:2005/AMD1:2008 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase); Amendment 1
• 2005 IEC 61000-3-2:2005 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
• 1970 IEC 61000-3-2:2000/AMD2:2004 Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
• 2004 IEC 61000-3-2:2004 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
• 1970 IEC 61000-3-2:2000/AMD1:2001 Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
• 2001 IEC 61000-3-2:2001 Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current 16 A per phase)
• 2000 IEC 61000-3-2:2000 Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current 16 A per phase)
• 1970 IEC 61000-3-2:1995/AMD2:1998 Amendment 2 - Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current <= 16 per phase)
• 1998 IEC 61000-3-2:1998 Electromagnetic Compatibility (EMC) - Part 3-2: Limits - Limits for Harmonic Current Emissions (Equipment Input Current Less Than or Equal to 16 A per Phase) (Edition 1.2; Edition 1.0: 1995 Consolidated with Amendments 1: 1997 and 2: 1998; Replaces IEC 60
• 1970 IEC 61000-3-2:1995/COR2:1997 Corrigendum 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 per phase)
• 1970 IEC 61000-3-2:1995/AMD1:1997 Amendment 1 - Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current <= 16 per phase)
• 1970 IEC 61000-3-2:1995/COR1:1995 Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 per phase)
• 1995 IEC 61000-3-2:1995 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current 16 A per phase)