SAE AS7928/7-1999
Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 3

Standard No.
SAE AS7928/7-1999
Release Date
1999
Published By
Society of Automotive Engineers (SAE)
Status
Replace By
SAE AS7928/7-2011
Latest
SAE AS7928/7B-2024
Scope
Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 3THE COMPLETE REQUIREMENTS FOR PROCURING THE SPLICE DESCRIBED HEREIN SHALL CONSIST OF THISDOCUMENT AND THE LATEST ISSUE OF SPECIFICATION MIL-T-7928. MIL-T-7928/5 IS NOT FOR NAVY USE. FORNAVY USE, USE MIL-S-81824 SPLICE.TABLE IREQUIREMENTS:1. MIN CABLE INSULATION SUPPORT: .060 FOR DASH 1 AND 2.094 FOR DASH 3, 4 AND 52. MATERIAL: COPPER (SEE ACQUISITION SPECIFICATION) OR COPPER ALLOY. MATERIAL SHALL HAVEADEQUATE ELECTRICAL CONDUCTIVITY AND SHALL BE SUFFICIENTLY STRONG TO RESIST CRACKINGAFTER FORMING AND CRIMPING.3. INSULATING SLEEVE: SEE ACQUISITION SPECIFICATION.4. FINISH: METAL, TIN PLATED: SEE ACQUISITION SPECIFICATION.5. DIMENSION B TO BE DETERMINED AS THE AVERAGE OF TWO DIAMETERS MEASURED AT RIGHT ANGLES.6. THE INSPECTION WINDOW AND LOCATOR SHALL PROVIDE A POSITIVE MEANS OF POSITIONING SPLICE INTHE APPLICABLE CRIMPTING TOOL AND PROVIDE VISIBLE INSPECTION OF STRIPPED WIRE ENDS.7. CRIMPING TOOLS: CRIMPING TOOLS FOR THE MIL-T-7928/5 SPLICES SHALL BE AS SPECIFIED BELOW.8. INSULATION SUPPORT AND WIRE BARREL MAY BE MULTIPLE PIECE CONSTRUCTION. CONTOUR MAY VARYFROM THAT SHOWN, WITHIN SPECIFIED DIMENSIONS, BUT WIRE LEAD-IN TO WIRE BARREL SHALL BEPROVIDED.9. QUALIFICATION: FOR QUALIFICATION, SPLICES SHALL BE TESTED WITH ANYONE OF THE FOLLOWINGWIRES: MIL-W-22759/1, 9 OR 11 OR MIL-W-81381/7.10. PART NUMBER: CONSISTS OF THE LETTER “M”, THE BASIC NUMBER OF THIS SPECIFICATION SHEET, AND ADASH NUMBER TAKEN FROM TABLE I.EXAMPLE: M7928/5-1 SPLICE FOR 26-24 WIRE RANGE.11. MIL-T-7928/5, UPON ISSUANCE OF A QPL FOR MIL-T-7928/5 SUPERSEDES MIL-T-7928/3 FOR PROCUREMENTAND NEW DESIGN. EXISTING STOCK OF M7928/3-2, -3 AND -4 ARE INTERCHANGEABLE WITH M7928/5-3, -4AND -5 AND MAY BE USED UNTIL EXHAUSTED. EXISTING STOCK OF M7928/3-1 SHOULD BE SCRAPPEDSINCE NO QPL HAS BEEN ESTABLISHED. AS REPLACEMENT, USE THE FOLLOWING EQUIVALENT DASH12. FLATTENING OF INSULATION SLEEVE TO FORM LOCATOR MAY CAUSE THE SLEEVE TO EXCEED THEE DIMENSION BY .050 MAX IN THE LOCATOR AREA FOR THE -1 THROUGH -4 AND .060 FOR THE -5.

SAE AS7928/7-1999 history

  • 2024 SAE AS7928/7B-2024 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
  • 2018 SAE AS7928/7A-2018 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
  • 2014 SAE AS7928/7A-2014 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
  • 2011 SAE AS7928/7-2011 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175°C TOTAL CONDUCTOR TEMPERATURE
  • 1999 SAE AS7928/7-1999 Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 3

SAE AS7928/7-1999 -All Parts

SAE AS7928-1999 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For SAE AS7928/1-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 150 Degrees C Total Conductor Temperature SAE AS7928/10-2012 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/10A-2016 TERMINALS@ LUG AND SPLICES@ CONDUCTOR@ CRIMP STYLE@ SPLICE@ ELECTRIC@ TIN WHISKER (PERMANENT@ TYPE II@ CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/10B-2021 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER RESISTANT (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/10C-2022 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER RESISTANT (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/10D-2023 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER RESISTANT (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/10E-2024 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER RESISTANT (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/11-A1-2008 Terminal@ Lug@ Crimp Style@ Copper@ Uninsulated@ Ring Tongue@ Tin Whisker Resistant@ Type I@ Class I@ for 175 °C Total Conductor Temperature SAE AS7928/11-A1-2008 Terminal@ Lug@ Crimp Style@ Copper@ Uninsulated@ Ring Tongue@ Tin Whisker Resistant@ Type I@ Class I@ for 175 °C Total Conductor Temperature SAE AS7928/11A-2010 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ UNINSULATED@ RING TONGUE@ TIN WHISKER RESISTANT@ TYPE I@ CLASS I@ FOR 175 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/11B-2011 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ UNINSULATED@ RING TONGUE@ TIN WHISKER RESISTANT@ TYPE I@ CLASS I@ FOR 175 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/11C-2015 Terminal, Lug, Crimp Style, copper, Uninsulated, Ring Tongue, Tin Whisker Resistant, Type I, Class I, for 175 °C Total conductor Temperature SAE AS7928/11D-2019 TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TIN WHISKER RESISTANT, TYPE I, CLASS I, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/11E-2023 TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TIN WHISKER RESISTANT, TYPE I, CLASS I, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/11_A1-2008 Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Tin Whisker Resistant, Type I, Class I, for 175 °C Total Conductor Temperature SAE AS7928/12-A1-2008 Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ Bell-Mouthed@ Tin Whisker@ Type II@ Class 1@ (for 105 °C Total Conductor Temperature) SAE AS7928/12-A1-2008 Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ Bell-Mouthed@ Tin Whisker@ Type II@ Class 1@ (for 105 °C Total Conductor Temperature) SAE AS7928/12A-2010 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER RESISTANT@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/12B-2011 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER RESISTANT@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/12C-2012 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/12D-2015 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/12E-2020 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER RESISTANT, TYPE II, CLASS 1, (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/12F-2023 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER RESISTANT, TYPE II, CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/12_A1-2008 Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Tin Whisker, Type II, Class 1 (for 105 °C Total Conductor Temperature) SAE AS7928/13-2009 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Tin Whisker Resistant, Ring, Tongue, Bell-Mouthed, Type II, Class 1 (for 150°C Total Conductor Temperature) SAE AS7928/13A-2015 TERMINALS@ LUG AND SPLICES@ CONDUCTOR@ CRIMP STYLE@ COPPER TERMINAL@ LUG@ INSULATED@ TIN WHISKER RESISTANT@ RING TONGUE@ BELL-MOUTHED@ TYPE II@ CLASS 1 (FOR 105°C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/13B-2015 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Tin Whisker Resistant, Ring, Tongue, Bell-Mouthed, Type II, Class 1 (for 150°C Total Conductor Temperature) SAE AS7928/13C-2020 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/13D-2023 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE) SAE AS7928/14-2011 Terminal, Electric, Permanent, Crimp Style, Tin-Coated Copper, Insulated, Environment Resistant, Class 1, 150 °C, Heatless Sealing SAE AS7928/14A-2016 Terminal, Electric, Permanent, Crimp Style, Tin-Coated Copper, Insulated, Environment Resistant, Class 1, 150 °C, Heatless Sealing SAE AS7928/15-2018 TERMINAL@ LUG@ UNINSULATED@ FLAG TYPE@ CRIMP STYLE@ COPPER@ SIZE 22-10@ CLASS I SAE AS7928/15A-2019 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ UNINSULATED@ FLAG TONGUE@ SIZES 22-10@ TYPE I@ CLASS I@ FOR 150?C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/15B-2021 TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, FLAG TONGUE, SIZES 22-10, TYPE I, CLASS I, FOR 150 ºC TOTAL CONDUCTOR TEMPERATURE SAE AS7928/1A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature SAE AS7928/1A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature SAE AS7928/1A_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 150°C Total Conductor Temperature SAE AS7928/1B-2007 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 105°C Total Conductor Temperature SAE AS7928/1C-2010 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 105°C Total Conductor Temperature SAE AS7928/1D-2015 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 105°C Total Conductor Temperature SAE AS7928/1E-2021 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/1F-2024 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE SAE AS7928/2-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper@ Insulated@ Rectangular Tongue@ for Thin Wall Wire@ Type II@ Class 1 for 150 Degrees C Total Conductor Temperature SAE AS7928/2A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper@ Insulated@ Rectangular Tongue@ for Thin Wall Wire@ Type II@ Class 1 for 105 Degrees C Total Conductor Temperature SAE AS7928/2A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper@ Insulated@ Rectangular Tongue@ for Thin Wall Wire@ Type II@ Class 1 for 105 Degrees C Total Conductor Temperature SAE AS7928/2A_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper, Insulated, Rectangular Tongue, for Thin Wall Wire, Type II, Class 1 for 150°C Total Conductor Temperature SAE AS7928/2B-2012 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE


Copyright ©2024 All Rights Reserved