ISO 630-2:2000
Structural steels - Part 2: Technical delivery requirements for hot-finished hollow sections
- Standard No.
- ISO 630-2:2000
- Release Date
- 2000
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 630-2:2011
- Latest
- ISO 630-2:2021
- Scope
- This part of ISO 630 specifies the technical delivery requirements for hot-finished hollow sections of circular, square or rectangular form. It is applicable to hollow sections formed hot with or without subsequent heat treatment or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot-formed product. Fine grain steels are generally delivered in the normalised condition. The grades, chemical composition and mechanical properties for non-alloy steels and fine grain steels are given in annexes A and B, respectively. NOTE 1 Requirements for tolerances, dimensions and sectional properties are given in ISO 657-14. NOTE 2 For the technical delivery requirements of hot rolled structural steels in other product forms, e.g. plates, wide strip, flats, bars and other structural sections, see ISO 630:1995. NOTE 3 For cold-formed structural hollow sections, see ISO 10799.
ISO 630-2:2000 Referenced Document
- ISO 10474:1991 Steel and steel products; inspection documents
- ISO 12096:1996 Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
- ISO 14284:1996 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
- ISO 148:1983 Steel; Charpy impact test (V-notch)
- ISO 2566-1:1984 Steel; Conversion of elongation values; Part 1 : Carbon and low alloy steels
- ISO 377:1997 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- ISO 404:1992 Steel and steel products; general technical delivery requirements
- ISO 643:1983 Steels; Micrographic determination of the ferritic or austenitic grain size
- ISO 6892:1998 Metallic materials - Tensile testing at ambient temperature
- ISO 6929:1987 Steel products; Definitions and classification Bilingual edition
- ISO 9001:1994 Quality systems - Model for quality assurance in design, development, production, installation and servicing
- ISO 9002:1994 Quality systems - Model for quality assurance in production, installation and servicing
- ISO 9304:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections
- ISO 9402:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
- ISO 9606-1:1994 Approval testing of welders - Fusion welding - Part 1: Steels
- ISO 9764:1989 Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections
- ISO 9765:1990 Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
- ISO 9956-1:1995 Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding
- ISO 9956-2:1995 Specification and approval of welding procedures for metallic materials - Part 2: Welding procedure specification for arc welding
- ISO 9956-3:1995 Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
ISO 630-2:2000 history
- 2021 ISO 630-2:2021 Structural steels - Part 2: Technical delivery conditions for structural steels for general purposes
- 2011 ISO 630-2:2011 Structural steels - Part 2: Technical delivery conditions for structural steels for general purposes
- 2000 ISO 630-2:2000 Structural steels - Part 2: Technical delivery requirements for hot-finished hollow sections
