IEC 60317-35:2000 PDF

Scope: This part of GB/T 6109 specifies the requirements for double-painted grade 155 self-adhesive direct welding enameled copper round wire. The inner paint layer is based on polyurethane resin, which can be modified if the chemical properties of the original resin are retained and all requirements specified for the enameled wire are met. The topcoat layer is a self-adhesive layer based on thermoplastic resin. Note: Modified resin is a resin that has undergone chemical changes or contains one or more additives to improve its certain performance or usage characteristics. Class 155 represents a thermal class, which requires a minimum temperature index of 155 and a thermal shock temperature of at least 175°C. The Celsius temperature corresponding to the temperature index is not the recommended operating temperature for enameled wire, as this depends on many factors including the type of equipment used. The nominal diameter range of conductors specified in this part is: 　——Class 1B: 0.020mm and above and 0.0800 and below; 　——Class 2B: 0.020mm and above and 0.0800 and below. The nominal diameter of the conductor is as specified in Chapter 4 of GB/T 6109.1-2008.

IEC 60317-35:2000 history

2019 IEC 60317-35:2013/AMD1:2019 Amendment 1 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
2019 IEC 60317-35:2019 Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer CONSOLIDATED EDITION
2013 IEC 60317-35:2013 Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
2000 IEC 60317-35:2000 Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
1970 IEC 60317-35:1992/AMD2:1999 Amendment 2 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
1970 IEC 60317-35:1992/AMD1:1997 Amendment 1 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
1992 IEC 60317-35:1992 Specification for particular types of winding wires; part 35: solderable polyurethane enamelled round copper wire, class 155, with a bonding layer