ISO 13216-1:1999
Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments

Standard No.

ISO 13216-1:1999

Release Date

1999

Published By

International Organization for Standardization (ISO)

Status

Be replaced

Replace By

ISO 13216-1:1999/Amd 1:2006

Latest

ISO 13216-1:1999/Amd 3:2006

Scope

This part of ISO 13216 specifies the dimensions, general requirements and static strength requirements of rigid anchorages for anchoring child restraint systems (CRS) in vehicles. It is applicable to fittings for the installation of CRSs for children with a mass of up to 22 kg, by means of two rigid anchorages positioned in the seat bight area, in passenger carrying vehicles. NOTE 1 This mass limit applies to CRSs where the inertia forces of the child and CRS are transferred via the anchorage system for the CRS. The anchorages may be used for systems for larger children, such as seats where the main forces are transferred through the adult seat belt, provided that the forces applied to the anchorages and the resulting excursions (see 4.2) do not exceed the limits in this part of ISO 13216. To assure compatibility with the anchorages, this part of ISO 13216 also specifies important features of CRSs equipped with rigid attachments, such as critical dimensions of the attachments and general requirements for handling. Supplementary devices, such as tether straps and reaction bars, which may be necessary for specific vehicle configurations or to fulfil performance criteria included in national and international standards and regulations, are not specified in this part of ISO 13216. An interim anchorage system that employs semi-rigid anchorages in the vehicle is described in annex A. Requirements for optional non-rigid attachments on the CRS are given in annex B. NOTE 2 Performance and strength requirements for the homologation of CRSs using attachments according to this part of ISO 13216 are presumed to be specified in other standards and regulations.

ISO 13216-1:1999 Referenced Document

• ISO 4130 Road vehicles; Three-dimensional reference system and fiducial marks; Definitions
• ISO 6549 Road vehicles - Procedure for H- and R-point determination

ISO 13216-1:1999 history

• 2006 ISO 13216-1:1999/Amd 3:2006 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments; Amendment 3: Specifications for the detection of use of ISOFIX CRS
• 2006 ISO 13216-1:1999/Amd 1:2006 Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 1: Seat bight anchorages and attachments — Amendment 1: CRF reduced height specification
• 1999 ISO 13216-1:1999 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments