ISO 11613:1999
Protective clothing for firefighters - Laboratory test methods and performance requirements

Standard No.
ISO 11613:1999
Release Date
1999
Published By
International Organization for Standardization (ISO)
Status
Replace By
ISO 11613:2017
Latest
ISO 11613:2017
Scope
This International Standard specifies test methods and minimum requirements for protective clothing to be worn during firefighting and associated activities where there is a risk of heat and/or flame. This International Standard covers the general clothing design, the minimum performance levels of the materials used, and the methods of test for determining these performance levels. Clauses 4 and 5 define two separate sets of design and performance requirements. This International Standard does not cover special clothing for use in other high risk situations such as specialized firefighting, or clothing for use in long term firefighting operations in high ambient temperature, for example brush, wildland, or forest firefighting. It does not cover protection for the head, hands and feet or protection against other hazards, for example chemical, biological, radiation and electrical hazards. These aspects may be dealt with in other standards. Selection of the appropriate system of clothing is dependent on carrying out an effective risk assessment which identifies the hazards to be faced, evaluates the likelihood of those hazards, and provides the means to reduce or eliminate these hazards. Details on one example at a recommended risk assessment approach and some factors for consideration are included in annex F. NOTE Additional personal protective equipment to protect the head, hands, and feet should be worn with clothing specified in this International Standard and in majority of situations breathing apparatus is also required to be worn. Firefighters should be trained in the use and care of protective clothing covered by this International Standard including an understanding of its limitations and of the other items of personal protective equipment that may be required depending on the risks encountered.

ISO 11613:1999 Referenced Document

  • EN 532:1994 Protective Clothing - Protection Against Heat and Flame - Test Method for Limited Flame Spread
  • ISO 13688:1998 Protective clothing - General requirements
  • ISO 17493 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven*2016-12-01 Update
  • ISO 3146:1985 Plastics; Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
  • ISO 3175-2:1998 Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene
  • ISO 4674:1977 Fabrics coated with rubber or plastics; Determination of tear resistance
  • ISO 4920:1981 Textiles; determination of resistance to surface wetting (spray test) of fabrics
  • ISO 5077:1984 Textiles; Determination of dimensional change in washing and drying
  • ISO 5081:1977 Textiles; Woven fabrics; Determination of breaking strength and elongation (Strip method)
  • ISO 5082:1982 Textiles; Woven fabrics; Determination of breaking strength; Grab method
  • ISO 6330:1984 Textiles; Domestic washing and drying procedures for textile testing
  • ISO 6530:1990 Protective clothing; protection against liquid chemicals; determination of resistance of materials to penetration by liquids
  • ISO 6942:1993 Clothing for protection against heat and fire; evaluation of thermal behaviour of materials and material assemblies when exposed to a source of radiant heat
  • ISO 811:1981 Textile fabrics; Determination of resistance to water penetration; Hydrostatic pressure test
  • ISO 9073-4:1997 Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance
  • ISO 9151:1995 Protective clothing against heat and flame - Determination of heat transmission on exposure to flame
  • ISO 9227:1990 Corrosion tests in artificial atmospheres; salt spray tests

ISO 11613:1999 history

  • 2017 ISO 11613:2017 Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting — Laboratory test methods and performance
  • 1999 ISO 11613:1999 Protective clothing for firefighters - Laboratory test methods and performance requirements
Protective clothing for firefighters - Laboratory test methods and performance requirements



Copyright ©2024 All Rights Reserved