This standard stipulates the classification, specifications, technical requirements, test methods, inspection rules, signs, factory certificates, transportation, storage, and use regulations of self-stressing concrete water pipe products. This standard applies to socket-type self-stressing concrete water pipes with a nominal inner diameter of 100-800mm and a working pressure of 0.4-1.2MPa, whose joints are sealed with circular cross-section rubber rings. Water and soil that have a corrosive effect on the pipe body and sealing ring should be laid and used after taking protective measures. If the specifications, dimensions, working pressure, and uses of the required pipes do not fall within the scope of this standard. It will be resolved through negotiation between the supply and demand parties.