IEC 60061-2:1969/AMD19:1999 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 19
PREFACE to the third edition ?C 1969This International Standard contains the recommendations of the IEC in regard to lamp caps and holders in general use today@ together with relevant gauges@ with the object of securing international interchangeability. The gauges illustrated@ although generally accepted in principle@ are not necessarily the only form in which they can be made.In view of the increased number of Standard Sheets contained in IEC 60061@ the opportunity has been taken@ at the issue of this third edition@ to split the single publication into three parts@ numbered IEC 60061-1@ IEC 60061-2@ IEC 60061-3@ covering lamp caps@ Iampholders and gauges respectively. A supplementary part ??Guidelines and general information??@ numbered IEC 60061-4@ was added in 1990.In order to facilitate use@ each part contains a dated Contents list of the sheets included in that part. An updated Contents list will be included in every additional annex.IEC work on Lamp caps and holders@ and gauges@ dates back to 1925@ when an Advisory Committee (No. 6) for the standardization of lamp caps and holders was appointed with the object of securing international interchangeability. In this work Advisory Committee No. 6 profited by the active co-operation of the Independent Committee on Standardization of Lamp Caps and Holders (INDECO) up to May 1939. During the war years@ 1939-1945@ no meetings could be held and it was not until early in 1947 that it was found possible to resume activities.At this time the IEC Central Office wrote to the National Committees proposing the appointment of a small preparatory committee of representatives of manufacturers of both lamp caps and lampholders. The outcome of this proposal was that a Committee was duly formed comprising experts from the majority of countries formerly represented by INDECO@ with the addition of an expert from the U.S.A.@ and@ at a later date@ a representative from Sweden. This Experts Preparatory Committee (EPC) took into account the work of the INDECO and the resultant recommendations were submitted to the National Committees by the full subcommittee on Lamp caps and holders (34B) for approval.
IEC 60061-2:1969/AMD19:1999 history
2023IEC 60061-2:1969/AMD59:2023 Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2023IEC 60061-2:1969/AMD47:2014/COR1:2023 Corrigendum 1 — Amendment 47 — Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 2: Lampholders
2022IEC 60061-2:1969/AMD58:2022 Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2020IEC 60061-2:1969/AMD57:2020 Amendment 57 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 2: Lampholders (Edition 3.57)
2020IEC 60061-2:1969/AMD56:2020 Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2020IEC 60061-2:1969/AMD55:2020 Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2018IEC 60061-2:1969/AMD54:2018 Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2017IEC 60061-2:1969/AMD53:2017 Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2017IEC 60061-2:1969/AMD52:2017 Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Holders
2016IEC 60061-2:1969/AMD51:2016 Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2015IEC 60061-2:1969/AMD50:2015 Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2015IEC 60061-2:1969/AMD49:2015 Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2014IEC 60061-2:1969/AMD48:2014 Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2014IEC 60061-2:1969/AMD47:2014 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
2013IEC 60061-2/AMD47:2013 Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 2: Lampholders (Edition 3.47)
2013IEC 60061-2:1969/AMD46:2013 Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 2: Lampholders (Edition 3.32)
2012IEC 60061-2:1969/AMD45:2012 Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2011IEC 60061-2:1969/AMD44:2011 Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
2011IEC 60061-2:1969/AMD43:2011 Amendment 43 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2011IEC 60061-2:1969/AMD42:2011 Amendment 42 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2010IEC 60061-2:1969/AMD41:2010 Amendment 41 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2010IEC 60061-2:1969/AMD40:2010 Amendment 40 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2009IEC 60061-2:1969/AMD39:2009 Amendment 39 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2009IEC 60061-2:1969/AMD38:2009 Amendment 38 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2008IEC 60061-2:1969/AMD37:2008 Amendment 37 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2007IEC 60061-2:1969/AMD36:2007 Amendment 36 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2007IEC 60061-2:2007 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 2: Lampholders
2006IEC 60061-2:1969/AMD35:2006 Amendment 35 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2006IEC 60061-2:1969/AMD34:2006 Amendment 34 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
2005IEC 60061-2:1969/AMD33:2005 Amendment 33 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 2:Lampholders
0000 IEC 60061-2:2005 CSV
2004IEC 60061-2:1969/AMD32:2004 Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2004IEC 60061-2:1969/AMD31:2004 Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2004IEC 60061-2:2004 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 2: Lampholders (Edition 3.31)
2003IEC 60061-2:1969/AMD30:2003 Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : Lampholders
2003IEC 60061-2:1969/AMD29:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 29
2003IEC 60061-2:1969/AMD28:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 28
2003IEC 60061-2:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2002IEC 60061-2:1969/AMD27:2002 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 27
2002IEC 60061-2:1969/AMD26:2002 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 26
2002IEC 60061-2:1969/AMD25:2002 Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
2002IEC 60061-2:2002 Culots de lampes et douilles ainsi que calibres pour le contr?le de l'interchangeabilité et de la sécurité – Partie 2: Douilles (Edition 3.27)
2001IEC 60061-2:1969/AMD24:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 24
2001IEC 60061-2:1969/AMD23:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 23
2001IEC 60061-2:1969/AMD22:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 22
2001IEC 60061-2:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
2000IEC 60061-2:1969/AMD21:2000 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 21
1999IEC 60061-2:1969/AMD20:1999 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 20
1999IEC 60061-2:1969/AMD19:1999 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 19
1998IEC 60061-2:1969/AMD18:1998 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 18
1969IEC 60061-2:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2 : Lampholders
IEC 60061-2:1969/AMD19:1999 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 19 was changed to IEC 60061-DB:2005 Lamp caps and holders together with gauges for the control of interchangeability and safety - 12-month subscription to online database comprising all parts of IEC 60061.