ISO 14567:1999
Personal protective equipment for protection against falls from a height - Single-point anchor devices

Standard No.
ISO 14567:1999
Release Date
1999
Published By
International Organization for Standardization (ISO)
Latest
ISO 14567:1999
Scope
This International Standard specifies requirements, test methods, and marking, labelling and packaging, as appro-priate, of both permanent and temporary single-point anchor devices exclusively for the attachment of personal protective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travel restriction (work restraint). It is applicable only to anchor devices for PPEs that conform to ISO 10333-1, ISO 10333-2, ISO 10333-3 and ISO 10333-5. NOTE 1 Further standards are in preparation for other types of PPE: ISO 10333-6 and ISO 14566 (see bibliography). Anchor devices are rated to sustain a maximum (dynamic) arresting force of 6,0 kN, and a maximum (static) loading of 1,0 kN (assuming a person of 100 kg mass) in post-fall arrest suspension, work-positioning mode, or restraint mode. Anchor devices are intended for single person use only. A rescuer should not attach to the same anchor device as a person being rescued, unless the anchor device has been specifically designed for such purposes, and the instructions for use specifically permit this application. NOTE 2 Vertical rigid or flexible line systems and horizontal lifelines are not within the scope of this International Standard, but are covered in ISO 10333-4 and ISO 16024.

ISO 14567:1999 Referenced Document

  • EN 10002-1 Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature*2001-07-01 Update
  • EN 10002-2 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
  • EN 45001 General criteria for the operation of testing laboratories
  • ISO 10333-1 Personal fall-arrest systems — Part 1: Full-body harnesses AMENDMENT 1*2000-01-01 Update
  • ISO 10333-2 Personal fall-arrest systems - Part 2: Lanyards and energy absorbers*2000-03-01 Update
  • ISO 10333-3 Personal fall-arrest systems - Part 3: Self-retracting lifelines*2000-04-01 Update
  • ISO 10333-5 Personal fall-arrest systems - Connectors with self-closing and self-locking gates*2001-12-01 Update
  • ISO 1140 Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes*2021-04-19 Update
  • ISO 9227 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of Warning*2024-02-19 Update

ISO 14567:1999 history

  • 1999 ISO 14567:1999 Personal protective equipment for protection against falls from a height - Single-point anchor devices
Personal protective equipment for protection against falls from a height - Single-point anchor devices



Copyright ©2024 All Rights Reserved