ISO 148-2:1998
Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines

Standard No.

ISO 148-2:1998

Release Date

1998

Published By

International Organization for Standardization (ISO)

Status

Withdraw

Replace By

ISO 148-2:2008

Latest

ISO 148-2:2016

Scope

This part of ISO 148 covers the verification of the constructional elements of pendulum-type impact testing machines. It is applicable to machines with 2 mm or with 8 mm strikers used for pendulum impact tests carried out, for instance, in accordance with ISO 148-1. It can analogously be applied to pendulum impact testing machines of other capacities and of different design. Impact machines used for industrial, general or research laboratory testing of metallic materials in accordance with this part of ISO 148 are referred to as industrial machines. Those with more stringent requirements are referred to as reference machines. Specifications for the verification of reference machines are found in ISO 148-3. This part of ISO 148 describes two methods of verification. a) The direct method which is static in nature and involves measurement of the critical parts of the machine to ensure that it meets the requirements of this part of ISO 148. The verification equipment shall have a certified traceability to the International Unit System. The direct method shall be used when a machine is being installed or repaired, or if the indirect method gives an incorrect result. b) The indirect method, which is dynamic in nature, and which use reference test pieces to verify points on the measuring scale. A pendulum impact testing machine is not in compliance with this part of ISO 148 until it has been verified by both the direct and indirect methods (see clause 12). The requirements for the reference test pieces are found in ISO 148-3. NOTE— This part of ISO 148 takes into account the total energy absorbed in fracturing the test piece using an indirect method. This total absorbed energy consists of 1) the energy needed to break the test piece itself and 2) the internal energy losses of the pendulum impact testing machine performing the first half-cycle swing from the initial position. Internal energy losses are due to: a) Air resistance, friction of the bearings of the rotation axis and the indicating pointer of the pendulum which can be determined by the direct method (see 9.4). b) Shock of the foundation, vibration of the frame and pendulum for which no suitable measuring methods and apparatus have been developed.

ISO 148-2:1998 history

• 2016 ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
• 2008 ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
• 1998 ISO 148-2:1998 Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines