ISO 898-5:1998 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
This part of ISO 898 specifies the mechanical properties of set screws and similar threaded fasteners not under tensile stresses with nominal thread diameters from 1,6 mm up to and including 24 mm, which are made of carbon steel or alloy steel.
The mechanical and physical properties apply when tested at an ambient temperature of 10 °C to 35 °C and will vary at higher or lower temperatures.
This part of ISO 898 does not apply to set screws requiring special properties such as
— specified tensile stresses (see ISO 898-1);
— weldability;
— corrosion resistance;
— ability to withstand temperatures above + 300 °C or below - 50 °C. NOTE — Set screws made from free-cutting steel should not be used above + 250 °C.
ISO 898-5:1998 history
2012ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread
1998ISO 898-5:1998 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
1980ISO 898-5:1980 Mechanical properties of fasteners; Part 5 : Set screws and similar threaded fasteners not under tensile stresses