1 Scope
This document specifies two preferred methods for the calibration of pyranometers using reference pyranometers ; indoor (Type A) and outdoor (Type B).
Indoor or type A calibration, is performed against a lamp source, while the outdoor
method B, employs natural solar radiation as the source.
Indoor calibration is performed either at normal incidence (type A1), the receiver
surface perpendicular to the beam of the lamp or under exposure to a uniform diffuse
lamp source using an integrating sphere (type A2).
Outdoor calibration is performed using the sun as a source, with the pyranometer in a horizontal position (type B1), in a tilted position (type B2), or at normal
incidence (type B3).
Calibrations according to the specified methods will be traceable to SI, through the
world radiometric reference ( WRR ), provided that traceable reference instruments are used.
This document is applicable to most types of pyranometers regardless of the type technology employed. The methods have been validated for pyranometers that comply with the requirements for classes A, B and C of ISO 9060. In general, all pyranometers may be calibrated by using the described methods, provided that a proper uncertainty
evaluation is performed.
Unlike spectrally flat pyranometers , non-spectrally flat pyranometers might have a spectral response that varies strongly with the wavel...
BS ISO 9847:2023 history
2023BS ISO 9847:2023 Solar energy. Calibration of pyranometers by comparison to a reference pyranometer