UL SUBJECT 2885-2015
UL Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials and Assessment of Halogens (Issue 2)

Standard No.
UL SUBJECT 2885-2015
Release Date
2015
Published By
Underwriters Laboratories (UL)
Status
 2018-11
Replace By
UL SUBJECT 2885-2018
Latest
UL SUBJECT 2885-2018
Scope
"These requirements cover tests and evaluation for the assessment of individual combustible materials used in wire and cable constructions. These requirements do not cover assessment of combined components of a cable construction. All non-metallic cable materials including insulating and jacketing materials and other cable components (e.g. tapes@ fillers@ threads@ pigments / colorants etc.) are eligible for evaluation to the requirements below; a) IEC 60754-1@ Test on gases evolved during combustion of materials from cables ?C Part 1: Determination of the halogen acid gas content and b) IEC 60754-2@ Test on gases evolved during combustion of materials from cables ?C Part 2: Determination of acidity (by pH measurement) and conductivity. Cable weighted pH and conductivity values are not to be used for the evaluation of test results in this outline. c) IEC 62821-1@ Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V ?C Part 1: general requirements@ Annex B (normative)@ Assessment of halogens@ Requirements for extruded material@ Sample test. The requirements may be applied to other material types if found to be appropriate. The final acceptance of materials certified to IEC 60754-1@ IEC 60754-2 or IEC 62821-1 is dependent upon its use in or as a complete product that complies with the requirements in the standard applicable to such a product. Materials certified to IEC 60754-1 and IEC 60754-2 are not considered as non-halogen@ non-halogenated@ zero halogen@ halogen-free@ low halogen@ low smoke zero halogen (LSZH) or any other related terminology. Materials certified to the sample test requirements for extruded material in Annex B (normative)@ Assessment of halogens@ Requirements for extruded material@ Sample test in IEC 62821-1 are considered halogen-free or ""HF"". This Outline does not investigate other properties of materials including flammability@ toxicity or environmental risks."

UL SUBJECT 2885-2015 history

  • 2018 UL SUBJECT 2885-2018 UL Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials and Assessment of Halogens (Issue 3)
  • 2015 UL SUBJECT 2885-2015 UL Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials and Assessment of Halogens (Issue 2)
  • 2013 UL SUBJECT 2885-2013 UL Standard for Safety Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials (Issue 1)



Copyright ©2024 All Rights Reserved