SAE AMS7702F-2010
Nickel-Iron Alloy@ Magnetic@ Sheet and Strip Cold Rolled@ Half-Hard Temper
- Standard No.
- SAE AMS7702F-2010
- Release Date
- 2010
- Published By
- SAE - SAE International
- Status
- 2010-12
- Latest
- SAE AMS7702F-2010
- Scope
- Form This specification covers two types of magnetic nickel-iron alloy in the form of sheet and strip. Application These products have been used typically for magnetic circuit parts that require high magnetic permeability at low flux densities with the fabricated parts to be annealed in dry hydrogen@ but usage is not limited to such applications. Classification The magnetic alloys covered by this specification are classified as follows: Type 1 - Nickel plus iron and other alloying elements@ usually copper and chromium. Type 1 may be required for applications involving severe forming. Type 2 - Nickel plus iron and other alloying elements@ usually copper and/or molybdenum. Unless a specific type is specified@ either type may be supplied.
SAE AMS7702F-2010 history
- 2010 SAE AMS7702F-2010 Nickel-Iron Alloy@ Magnetic@ Sheet and Strip Cold Rolled@ Half-Hard Temper
- 2006 SAE AMS7702E-2006 Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half-Hard Temper
- 2000 SAE AMS7702D-2000 Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half-Hard Temper
- 1994 SAE AMS7702C-1994 Nickel-Iron Alloy@ Magnetic@ Sheet and Strip Cold Rolled@ Half-Hard Temper
- 1988 SAE AMS7702B-1988 MAGNETIC ALLOY SHEET AND STRIP Nickel-Iron Alloy 1/2 Hard
- 1978 SAE AMS7702A-1978 MAGNETIC ALLOY SHEET AND STRIP Nickel-Iron Alloy 1/2 Hard
- 1956 SAE AMS7702-1956 MAGNETIC ALLOY SHEET AND STRIP Nickel-Iron Alloy 1/2 Hard
