ASTM D8074-22
Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
- Standard No.
- ASTM D8074-22
- Release Date
- 2022
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D8074-23
- Latest
- ASTM D8074-23
- Scope
- 1.1 This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, including adhesive wear between an uncoated piston ring and cylinder liner. This test method is commonly referred to as the DD13 Scuffing Test. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception—Where there is no direct SI equivalent, such as the units for screw threads, National Pipe Threads/ diameters, tubing size, and single source supply equipment specifications. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Annex A2 for specific safety precautions. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D8074-22 Referenced Document
- ASTM D130 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
- ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
- ASTM D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
- ASTM D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
- ASTM D2500 Standard Test Method for Cloud Point of Petroleum Products
- ASTM D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
- ASTM D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
- ASTM D3338 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3524 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
- ASTM D4052 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
- ASTM D4175 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants*， 2023-07-01 Update
- ASTM D4294 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
- ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
- ASTM D4683 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
- ASTM D4739 Standard Test Method for Base Number Determination by Potentiometric Titration
- ASTM D482 Standard Test Method for Ash from Petroleum Products
- ASTM D5185 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM D5186 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
- ASTM D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
- ASTM D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
- ASTM D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
- ASTM D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
- ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil
- ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
- ASTM D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
- ASTM D86 Standard Test Method for Distillation of Petroleum Products
- ASTM D93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D97 Standard Test Method for Pour Point of Petroleum Products
- ASTM D975 Standard Specification for Diesel Fuel Oils
- ASTM D976 Standard Test Methods for Calculated Cetane Index of Distillate Fuels
- ASTM E168 Standard Practices for General Techniques of Infrared Quantitative Analysis
- ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D8074-22 history
- 2023 ASTM D8074-23 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
- 2022 ASTM D8074-22 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
- 2019 ASTM D8074-19 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
- 2018 ASTM D8074-18 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
- 2016 ASTM D8074-16 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
