1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in
non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the
provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico’s Electrical Installations,
NOM-001-SEDE, as follows:
a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K, and 13; and
b) Enclosures for indoor or outdoor locations, Types 3, 3X, 3R, 3RX, 3S, 3SX, 4, 4X, 6, and
6P.
1.2 This standard covers additional environmental construction and performance requirements for
enclosures. The general requirements for enclosures are contained in CSA C22.2 No. 94.1, UL 50, and
NMX-J-235/1-ANCE (See Annex B, Ref. No. 10) or the end-use product standards that are to be used in
conjunction with this standard.
1.3 This standard does not cover the requirements for protection of devices against conditions such as
condensation, icing, corrosion, or contamination that may occur within the enclosure or that may enter via
conduit or unsealed openings.
1.4 Where an individual product standard contains requirements that are at variance with those of this
standard, the requirements of the individual product standard take precedence.
CSA C22.2 No.94.2-2015 history
1970CSA C22.2 No.94.2-2020 Enclosures for electrical equipment, environmental considerations
2015CSA C22.2 No.94.2-2015 Enclosures for electrical equipment, environmental considerations
2007CSA C22.2 NO.94.2-2007 Enveloppes pour appareillage électrique : facteurs ambiants (Première édition; Mise à jour no 1: Juillet 2008)